VoiceOver Getting Started Guide for Mavericks Chapter 1. Introducing VoiceOver This chapter introduces VoiceOver, the advanced screen-reading technology integrated into OS X. VoiceOver enables users with visual disabilities to control their Mac using a rich set of keyboard commands and gestures. About VoiceOver VoiceOver is a full-featured screen reader built into OS X that speaks the text in documents and windows, and describes aloud what appears on your screen. Using VoiceOver, you control your Mac primarily with a keyboard, refreshable braille display, or trackpad. To turn on VoiceOver, press Command-F5. You use the VoiceOver cursor to move around the screen, select buttons and other controls, and to read and edit text. The keyboard focus and mouse pointer work with the VoiceOver cursor in a variety of ways. You use VoiceOver commands to navigate and interact with items on the screen. You enter the commands by holding down the Control and Option keys (called the “VoiceOver keys,” or “VO keys” for short) at the same time, along with one or more other keys. For example, to use the VoiceOver command VO-F1, you press the Control, Option, and F1 keys together. You can assign VoiceOver commands to numeric keypad keys, keyboard keys, braille display input keys, and trackpad gestures, so you can use the commands with fewer keystrokes. Turn VoiceOver on or off Turn VoiceOver on or off at any time. • Press Command-F5. If VoiceOver is on, pressing Command-F5 turns it off. • Press Command-Option-F5 to display the Accessibility Options panel, then select or deselect the VoiceOver option. Pause or mute speech Temporarily pause VoiceOver when it’s speaking, or mute it altogether. • To pause speech, press the Control key, or tap with two fingers. To resume speech, repeat the key or gesture. • To mute speech, in VoiceOver Utility, click the Speech category, click Voices, then select the checkbox. If you move the VoiceOver cursor after you pause the speech, VoiceOver begins speaking the item that’s in the VoiceOver cursor. You can adjust the volume of VoiceOver speech to the point of muting it by pressing VO-Command-Right Arrow repeatedly. Use the welcome dialog When you first turn on VoiceOver, a welcome dialog is shown. • To continue using VoiceOver, press Enter or click OK. • To continue using VoiceOver and prevent the welcome dialog from appearing each time you turn on VoiceOver, press V or select “Do not show this message again.” • To start the VoiceOver Quick Start tutorial, press the Space bar or click Learn VoiceOver. • To turn off VoiceOver, press Command-Q, press Escape, or click Cancel. You can set an option in the General category in VoiceOver Utility to control whether the dialog is shown. Use the VoiceOver Help menu Learn more about using VoiceOver and access commands for the item in the VoiceOver cursor. 1. When VoiceOver is on, press VO-H to display the VoiceOver Help menu. To increase or decrease the menu’s font size, press the } or { key. 2. Navigate the menu and submenus using the arrow keys. ◦ If you know the name of a menu item, type some letters of its name to narrow the menu to only items that contain those letters. To list all the items again, press the Delete key. ◦ When you enter a submenu, you hear the number of items it contains. ◦ If a menu item has a keyboard command, you hear it announced with the name of the item. For example, the command to open the Commands menu is VO-H-H. 3. To select a menu item, press the Space bar or the Return key. To close the VoiceOver Help menu without making a selection, press the Escape key. Learn keys, shortcuts, and gestures with keyboard help Using keyboard help, you can quickly hear the VoiceOver command for a key. For example, press Control-Option-D to hear “Control-Option-D Go to Dock Moves VoiceOver cursor to the Dock.” You can use keyboard help with the commanders, refreshable braille displays, and VoiceOver gestures. While using keyboard help, you can’t use your keyboard, braille display, or trackpad for other tasks. • To start keyboard help, press VO-K. • To hear the name of a keyboard or braille key, press the key. • To hear the VoiceOver command for a key, press Control-Option and the key. • To hear the name and VoiceOver command for a gesture, use the gesture. • To hear alternative functions for a key or gesture, press Control-Option with a modifier key (such as Shift), then press a key to hear alternative functions the key may have. • To quit keyboard help, press the Escape key. If you have trouble using a standard QWERTY keyboard, use the Dvorak layout, which optimizes key layout for ease of use. Chapter 2. Learning VoiceOver Basics This chapter provides information about the basics of using VoiceOver, including how to get help while you’re learning. You’ll learn how to turn VoiceOver on and off and pause it, how to hear information about items on the screen and interact with them, and how to use cursor tracking. Automatically use VoiceOver in the login window Set a system preference to automatically use VoiceOver in the OS X login window. Choose Apple menu > System Preferences, click Users & Groups, then click Login Options. If Users & Groups preferences are locked, click the lock icon in the lower-left corner of the window, then type an administrator password to unlock them. To turn on VoiceOver in the login window yourself, press Command-F5. Change the default behavior of function keys By default, you must also press the Fn key to use a function key in a VoiceOver command. You can change this default behavior so that you don’t have to press the Fn key for VoiceOver commands. 1. Choose Apple menu > System Preferences, click Keyboard, then click Keyboard. 2. Select the “Use all F1, F2, etc. keys as standard function keys” checkbox. Some keyboards have dedicated keys for Home, End, Page Up, and Page Down. These are important VoiceOver navigation keys. If you’re using a keyboard that doesn’t have these keys, use the arrow keys with the Fn key for these actions. Find commands using the Commands menu If you know the name of a VoiceOver command but can’t recall the keys to press, use the Commands menu to find the command, and apply it to the item currently in the VoiceOver cursor. 1. When VoiceOver is on, open the Commands menu by pressing VO-H-H. 2. Type some letters of the command name to narrow the Commands menu to just those commands that contain the letters you typed. Use the arrow keys to navigate the Commands menu until you hear the command you want. To list all commands again, press Delete. 3. When you hear the command you want, press the Return key or the Space bar to apply the command to the item in the VoiceOver cursor. Lock and unlock the VO keys You enter VoiceOver commands by pressing the Control and Option keys (the VO keys) with other keys. For example, press VO-H to open the VoiceOver Help menu. You can lock the VO keys so you don’t have to press them. For example, with the VO keys locked, you would press just H to open the VoiceOver Help menu. To lock the keys, press VO-;. To unlock them, press the command again. Make VoiceOver ignore the next key press Some apps use the Control and Option keys (the VO keys) together with another key to perform an action. If you’re using VoiceOver and want to use the app’s command, you can tell VoiceOver to ignore the next key combination. Press VO-Tab. VoiceOver will ignore the next key combination you press. You can change many keyboard shortcuts for apps in the Shortcuts pane of Keyboard preferences. Learn or mute VoiceOver sound effects VoiceOver uses unique sound effects to denote events (such as a window opening) and locations (such as when you reach a border). • To learn VoiceOver sound effects, open the VoiceOver Help menu by pressing VO-H. Then use the arrow keys to navigate to Sounds Help. • To mute VoiceOver sound effects (without affecting the audio of other apps), select the option in the Sound category in VoiceOver Utility. If you’re using VoiceOver gestures, avoid muting sound effects. Hearing the blank space sound effect is very useful in determining where items are located on the desktop. Hear hints and information about an item VoiceOver provides several ways to learn more about the item in the VoiceOver cursor. • To hear a description of the item, press VO-F3, or tap the trackpad three times. A sound effect indicates the cursor is in a blank area. • To hear the item’s help tag, press VO-Shift-H. VoiceOver tells you if an item doesn’t have a help tag (sometimes called a “tooltip”). • To hear how to use the item, press VO-Shift-N. You can set options in the Hints pane of the Verbosity category in VoiceOver Utility to have help tags and instructions read automatically. Use positional audio If you have stereo headphones or dual speakers, you can use positional audio to hear audio cues (or sound effects) about an item’s location on the screen. The positional audio option is on by default; you can turn it off in the Sound category in VoiceOver Utility. If you have chosen to play stereo audio as mono audio in Accessibility preferences, you can’t hear positional audio using VoiceOver. Interact with content areas Navigate past a content area, such as a scroll area or table, or stop and interact with it. For example, in a Finder window you can navigate past the sidebar to get to the view browser, or interact with the sidebar to open folders and files. • To start interacting, press VO-Shift-Down Arrow, or flick right with two fingers. A sound effect indicates when there’s nothing more to interact with. • To stop interacting, press VO-Shift-Up Arrow, or flick left with two fingers. You can interact with any element that has a title or embedded text, such as a pop-up button or a Smart Address in Mail, so VoiceOver can read the element by word or by character. The VoiceOver cursor stays within the boundaries of the area you’re interacting with, so you can navigate only within the area. Hear changes in progress or status Hear when the progress bar or status text in the VoiceOver cursor changes. For example, while installing software, you might hear “Installation 45 percent completed” or you might hear a ticking sound. 1. For status text, open the rotor to verbosity settings by pressing VO-V. 2. Press the Left Arrow or Right Arrow key until you hear “when status changes” and the current setting. 3. Press the Up Arrow or Down Arrow key until you hear the setting you want. 4. To close the rotor, press Escape. You can set progress bar and status text options in the Announcements pane of the Verbosity category in VoiceOver Utility. If you’re using portable preferences on a guest computer when you change status settings, the settings are saved to the portable preferences drive and not to the guest computer. Select and deselect items Select or deselect a single item or multiple items. • To select a single item, press VO-Return. • To select multiple items, start interacting with a list or table, then press VO-Command-Return. For each item, navigate to it, then press VO-Command-Return. To stop selecting items, copy or cut them, then press the Escape key, or stop interacting with the list or table. • To deselect a single item, press VO-Command-Return, or double-tap. • To deselect multiple items, navigate to an item, then press VO-Command-F4. VoiceOver deselects all items except the one in the VoiceOver cursor. To deselect that item, press VO-Command-Return. Drag and drop items Drag and drop items from one location to another. Both the original and destination locations must be on the screen when you start dragging the items. Use commands 1. Move the VoiceOver cursor to an item and press VO-, to mark it for drag and drop.To use a modifier with the command, press and hold VO-, until the Drag and Drop menu appears, then choose a modifier. 2. Move the VoiceOver cursor to the location where you want to drop the marked item, then use one of the following commands to drop the marked items: 3. On the cursor location: VO-.
In front of the cursor location: VO-<
After the cursor location: VO-> If you selected a modifier at the start of the operation, VoiceOver uses the modifier to perform any special behaviors when it drops the item. For example, if you drop a marked file in the Finder using the Option modifier, VoiceOver duplicates the file. Use the mouse Mouse tracking can be on or off. 1. Move the VoiceOver cursor to the item you want to move.If mouse tracking is off, press VO-Command-F5 to move the VoiceOver cursor to the target location. 2. Verify that the mouse is on the item by pressing VO-F5. 3. Lock the mouse button by pressing VO-Command-Shift-Space bar. 4. Move the VoiceOver cursor to the target location.If mouse tracking is off, press VO-Command-F5 to move the mouse to the target location. 5. Verify that the mouse is on the target location by pressing VO-F5. 6. Unlock the mouse button by pressing VO-Command-Shift-Space bar. Drag to a hot spot If you used the Commanders category in VoiceOver Utility to assign “Drop Marked Item” hot spot commands to keys or gestures, you can drag items to the same hot spot. 1. Mark an item to drag, then use one of the commands you assigned to a key or gesture. VoiceOver asks you to press the number key for the hot spot you want to use for the drop, then drops the marked item after, before, or on the hot spot. 2. After the drop, the VoiceOver cursor returns to its original location. Repeat for each item you want to drop on the hot spot. A marked item remains available to drop again unless it’s no longer on the screen, or you mark a new item for drag and drop. Set up or turn off cursor tracking By default, the VoiceOver cursor and keyboard focus are set to follow (or “track”) each other. This is called “cursor tracking.” You can also set the VoiceOver cursor and the mouse pointer to track each other. It can be useful to turn off cursor tracking, and use the keyboard, mouse pointer, and insertion point independently. For example, in Messages you can move the VoiceOver cursor to the message portion to hear incoming messages, while the keyboard focus remains in the text field to type outgoing messages. Turn on cursor tracking for the mouse Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Navigation category, then choose a mouse pointer option: Follows VoiceOver cursor: The mouse pointer moves with the VoiceOver cursor. Moves VoiceOver cursor: The VoiceOver cursor follows the mouse pointer. Turn off cursor tracking 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Navigation category, then deselect these checkboxes: 2. Keyboard focus follows VoiceOver cursor
VoiceOver cursor follows keyboard focus
Insertion point follows VoiceOver cursor
VoiceOver cursor follows insertion point 3. From the “Mouse pointer” pop-up menu, choose “Ignores VoiceOver cursor.” To temporarily turn cursor tracking on or off while you’re working, press VO-Shift-F3. This command doesn’t change the settings in VoiceOver Utility; it just switches them on or off until you press the command again. Work with cursor tracking turned off Move the VoiceOver cursor to the keyboard focus: Press VO-Shift-F4. Move the keyboard focus to the VoiceOver cursor: Press VO-Command-F4. Move the VoiceOver cursor to where the mouse pointer is focused: Press VO-Shift-F5. Move the mouse pointer to where the VoiceOver cursor is focused: Press VO-Command-F5. Customize VoiceOver with VoiceOver Utility VoiceOver Utility is the app you use to customize VoiceOver settings. To learn about the options, click the Help button in the lower-right corner of each pane in VoiceOver Utility. To open VoiceOver Utility, do one of the following: • When VoiceOver is on, press VO-F8. • Choose Apple menu > System Preferences, click Accessibility, click VoiceOver, then click Open VoiceOver Utility. Search VoiceOver Utility Search VoiceOver Utility to quickly find and go to specific options, instead of navigating the various categories and panes. 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), interact with the toolbar, then type in the search field. 2. To navigate the list of search results that appears, press VO-Down Arrow or VO-Up Arrow.For each result, VoiceOver Utility shows the pane where the option is located and highlights the option. 3. To select a result, press the Return key. Chapter 3. Learning OS X Basics This chapter introduces OS X and key features such as the desktop, Finder, and Dock. You’ll learn how to use menus, buttons, and accessibility features that make it easier to use your Mac, as well as how to work with apps and windows. Navigate the desktop The desktop shows icons for many items, such as folders, documents, or image files. When you open a folder on the desktop, a new Finder window opens automatically. • To move to the desktop, press VO-Shift-D. • To quickly move to an item on the desktop, type the first letter of the item. For example, if you have a file named “travel plans” on the desktop, type “T” to move to it. • To move around items on the desktop, press the arrow keys. • To open the selected item on the desktop, press Command-O. Navigate the Finder Use VoiceOver commands or gestures to open and navigate Finder windows, and Finder shortcuts to work with files and folders. NOTE:Make sure cursor tracking is on, and the VoiceOver cursor and keyboard focus track each other. Set up or turn off cursor tracking Open a Finder window Do one of the following: • Move to the Dock by pressing VO-D, or double-tap near the bottom edge of the trackpad. Then navigate to the Finder, which is the first item in the Dock, and press Return. • Move to the desktop by pressing VO-Shift-D. Then go to the menu bar by pressing VO-M, or double–tapping near the top edge of the trackpad. Then use the Right Arrow key to navigate to the Finder menu. • Open the Application Chooser by pressing VO-F1-F1, or double-tapping near the left edge of the trackpad. Choose Finder in the Application Chooser. You can also use the OS X shortcut of holding down the Command key and pressing Tab repeatedly until you hear “Finder.” Navigate a Finder window 1. In a Finder window, press VO-Right Arrow or VO-Left Arrow to move through the window until you hear “toolbar.” Interact with the toolbar. 2. Interact with content areas 3. Press VO-Right Arrow until you hear “view radio group” and then interact with that control. Press VO-Right Arrow until you hear the view (such as Icon or List) you want to use. 4. When you have selected a view, stop interacting with the view radio group and the toolbar, then press VO-Right Arrow to move through the window until you hear “sidebar.” 5. Interact with the sidebar, then move down the list of items in the sidebar by pressing VO-Down Arrow. When you hear the item you want, jump to it in the view browser; you can interact with it. To jump, press VO-J. If you’re using VoiceOver gestures, keep a finger on the trackpad and press the Control key. 6. Move to and select the item you want to open, using the method for the view you’re in: 7. Icon view: Use the arrow keys to move to the item you want.
List view: To move down the list rows, press VO-Down Arrow. To expand and collapse a folder, press VO-\. To move the VoiceOver cursor across a row and hear information about an item, press VO-Right Arrow. Or press VO-R to hear the entire row read at once.
Column view: To move down the list until you find the folder or file you want, use the Down Arrow key. To move into subfolders, press the Right Arrow key. 
Cover Flow view: To flip through the items in the top section and move automatically through the corresponding list rows in the bottom section, press the Left Arrow or Right Arrow key. 8. When you find the file or folder you want to open, use the Finder shortcut Command-O or Command-Down Arrow to open it. VoiceOver announces when you have selected an alias or a file or folder you don’t have permission to open. Use Finder shortcuts • To open the selected item, press Command-O or Command-Down Arrow. • To move to the parent of the selected item (such as the folder that contains a subfolder you selected), press Command-Up Arrow. • To add the selected item to the Finder sidebar, press Command-T. • To add the selected item to the Dock, press Shift-Command-T. You can temporarily hide the toolbar and sidebar in a Finder window to make it easier to navigate. To hide or show the toolbar, press Option-Command-T. To hide or show the sidebar, press Option-Command-S. Use the Dock Use the Dock to open apps, documents, folders, or stacks. Navigate the Dock • To move the VoiceOver cursor to the Dock, press VO-D, or double-tap near the bottom edge of the trackpad. • To move in the Dock, use the arrow keys, or flick or drag up, down, left, or right. • Type the name of an app or folder. For example, to move the VoiceOver cursor to Mail, start typing its name. • To exit the Dock, press the Escape key, or scrub back and forth with two fingers. Use items in the Dock • To move an item, hold down the Option key and use the arrow keys to move the item. Each arrow key press moves it one place. • To open an item, press VO-Space bar, or double-tap. • To open a shortcut menu for an item, press VO-Shift-M, then use the arrow keys to move up and down the shortcut menu. To close the shortcut menu without making a selection, press the Escape key. • To add an item, navigate to the item in the Finder or on the desktop, then press Command-Shift-T. The item is added next to the Trash icon. • To remove an item, open its shortcut menu, then choose Remove from Dock. Use Launchpad Launchpad provides a full-screen grid of icons representing the apps on your Mac. 1. Go to the Dock by pressing VO-D, then navigate to the Launchpad icon by pressing VO-Left Arrow or VO-Right Arrow. 2. Open Launchpad by pressing VO-Space bar. VoiceOver automatically interacts with the grid. 3. Navigate down, up, left, and right in the grid by pressing VO and an arrow key. If you have a lot of apps, Launchpad may have more than one page. To display other pages, stop interacting with the grid, then navigate to the radio buttons at the bottom of the page. 4. To open an app, press VO-Space bar. To exit Launchpad without opening an app, press Escape. You can drag and drop apps to rearrange them in Launchpad. Drag and drop items Perform an item’s alternate action Some menu commands may offer alternate actions when you press a modifier key. For example, when you choose Apple menu > About This Mac and hold down the Option key, the command changes to System Information. Buttons, checkboxes, and other user interface elements can also offer alternate actions. For example, moving the pointer over a label may display additional buttons. If an app or website developer identifies these types of alternate items for screen readers, VoiceOver automatically announces them, so you can show and navigate to them. • For menu commands, move the VoiceOver cursor to a menu command, then hold down a modifier key. If the command has an alternate action associated with that modifier, VoiceOver speaks it. To perform the action, continue to hold the modifier key and press Enter, or press the other required keys. • For user interface elements, VoiceOver announces when alternate items exist. Press VO-Command-Space bar to open the Actions menu, then choose Show alternate items. To show the default items again, press VO-Command-Space bar to open the Actions menu, then choose Show default items. Click or double-click the mouse Use VoiceOver commands to simulate mouse clicks. 1. Make sure the mouse pointer is on the item you want to click. If you didn’t set the mouse pointer to follow the VoiceOver cursor (in the Navigation category of VoiceOver Utility), you must move the VoiceOver cursor to the item and then press VO-Command-F5 to place the pointer on the item. 2. To click the mouse, press VO-Shift-Space bar. To double-click the mouse, press VO-Shift-Space bar-Space bar. You can use Mouse Keys to control the mouse pointer (except when the NumPad Commander is enabled). Use the cursor control keys VoiceOver uses three function keys to describe the keyboard, VoiceOver cursor, and mouse pointer. NOTE:If your keyboard has an Fn key, press it when you press a function key. F3—VoiceOver Cursor Key To hear a description of the item in the VoiceOver cursor, press VO-F3. This could be a control, text in a document, an HTML content area, and more. The description includes the current state of the item. For example, you might hear that the checkbox is selected, or hear the value settings of a slider. F4—Keyboard Focus Key • To hear a description of the item on which the keyboard is focused, press VO-F4. The description includes the current state of the item and, if it applies, whether it is enabled or disabled. • To move the VoiceOver cursor to where the keyboard is focused, press VO-Shift-F4. When you move the keyboard focus, the VoiceOver cursor remains where you moved it. Use this command when cursor tracking is turned off. F5—Mouse Key • To hear a description of what is under the mouse pointer, press VO-F5. • To hear the location of the mouse pointer as x and y coordinates, press VO-F5-F5. The origin point is the top-left corner of the main display, where the Apple menu is located. • To hear the location of the mouse pointer in x and y coordinates relative to the current window, press VO-F5-F5-F5. • To move the VoiceOver cursor to where the mouse pointer is located, press VO-Shift-F5. When you move the mouse pointer, the VoiceOver cursor remains where you moved it. Use this command when cursor tracking is turned off, or if you don’t have mouse tracking options turned on in VoiceOver Utility. • To move the mouse pointer to the VoiceOver cursor, press VO-Command-F5. When you move the mouse pointer again, the VoiceOver cursor does not move with it. Use this command when cursor tracking is turned off, or if you don’t have mouse tracking options turned on in VoiceOver Utility. Use buttons, checkboxes, and other controls Make sure you know where the keyboard focus and VoiceOver cursor are located before you select a control. Hear the current selection • To select or deselect a control, press VO-Space bar, or double-tap. If Quick Nav is on, press Up Arrow-Down Arrow. • To hold down a button that’s in the VoiceOver cursor, press and hold VO-Space bar. To stop holding the button, release the Space bar. • To open a pop-up menu, press VO-Space bar, or double-tap. If Quick Nav is on, press Up Arrow-Down Arrow. • To adjust a slider, stepper, or splitter, start interacting with the control by pressing VO-Shift-Down Arrow, or flicking right with two fingers. Then to increase or decrease the setting, use the VO and arrow keys, or flick up or down with a single finger. To stop interacting with the control, press VO-Shift-Up Arrow, or flick left with two fingers. You can set an option in the Announcements pane of the Verbosity category in VoiceOver Utility to control the level of detail you hear in dialogs. Use Mission Control Mission Control shows what’s active on your Mac. A row of thumbnails across the top of the screen represents Dashboard, desktop spaces, and your full-screen apps. The lower part of the screen groups the open windows on your desktop by app. 1. Open Mission Control from the Dock, then navigate to the Spaces list or Expose windows group by pressing VO-Left Arrow or VO-Right Arrow. To add a desktop to the Spaces list, navigate to the Add Desktop button, located immediately after the Spaces List. 2. Interact with the Spaces list or the Expose windows group by pressing VO-Shift-Down Arrow. 3. Navigate to an item in the list or group by pressing VO-Up Arrow or VO-Down Arrow. ◦ To work with the selected item, such as a desktop, press VO-Space bar. ◦ To close the selected desktop, press VO-Command-Escape, then confirm your action by pressing Return. To exit Mission Control without making a selection, press Escape. Take an app full screen In many OS X apps, you can expand the window to fill your screen. • To expand to full screen, navigate to the upper-right corner of the app window to the full-screen button, then press VO-Space bar. • When you work full screen, the menu bar is displayed only on demand. To navigate to the menu bar to display it, press VO-M. • To exit full screen for the current app, press VO-F2-F2 to display the Window Chooser, press the Down Arrow or Up Arrow key until you hear “Exit full screen,” then press the Space bar. Hear open apps and windows Hear which apps and windows are open on your Mac. • To hear which app is active and how many apps are open, press VO-F1. • To hear which window is active, press VO-F2. Switch between apps When you have more than one app open or more than one window open for an app, quickly switch to another app or window using the Application Chooser. 1. To open the Application Chooser, press VO-F1-F1, or double-tap near the left edge of the trackpad. 2. To navigate the list of open apps, press the Down Arrow or Up Arrow key, or flick down or up. 3. When you hear the app you want, press the Space bar or double-tap. If you used the VoiceOver command to open the chooser, pressing the Space bar opens a submenu that lists all open windows, dialogs, or alerts for the app. Navigate a submenu in the same way you did the list of apps. To exit the Application Chooser without making a selection, press the Escape key, or scrub back and forth with two fingers. Switch between windows When you have more than one window open for an app, you can quickly switch between windows. 1. To open the Window Chooser, press VO-F2-F2, or double-tap near the right edge of the trackpad. 2. To navigate the list of open windows, press the Down Arrow or Up Arrow key, or flick down or up. 3. To select the window, press the Space bar or double-tap. To exit the Window Chooser without making a selection, press the Escape key, or scrub back and forth with two fingers. If the window where the VoiceOver cursor is located doesn’t move in front of other windows, you can move it to the front by pressing VO-Shift-F2. Move windows and objects Move windows and some objects in apps, such as graphics and text boxes. 1. Navigate to the item you want to move, then press either VO-` (for a window) or VO-Command-` (for an object). VoiceOver tells you if an item can’t be moved. 2. Move the window or object in one of these ways: 3. Move up, down, left, or right: Press the arrow keys.
Move diagonally: Press VO with the Up Arrow or Down Arrow key and the Left Arrow or Right Arrow key. For example, to move a window diagonally toward the upper-right corner, press VO-Right Arrow-Up Arrow. 4. To stop moving the window or object, press the Escape key. You can’t use other VoiceOver commands until you stop moving the item. You can use certain number keys to quickly move windows and objects around the screen: the top (left, middle, and right) section using keys 1, 2, and 3; the center (left, middle, and right) section using keys 4, 5, and 6; and the bottom (left, middle, and right) section using keys 7, 8, and 9. Resize windows and objects Resize windows and some objects in apps, such as graphics and text boxes. You can move the item at the same time you resize it. 1. Navigate to the item you want to resize and press either VO-~ (for a window) or VO-Command-~ (for an object). VoiceOver tells you if an item can’t be resized. 2. In the Resize menu that appears, choose Resize, Resize and Move to Grid, or Resize and Move to Section. 3. Navigate to the submenu where you can choose to resize an edge or corner, resize and move to an area of a grid such as the top left, or resize and move to a section, such as the bottom half. 4. Resize the item. ◦ To resize an edge, use the VO and arrow keys (for example, press VO-Right Arrow to extend the right edge of a window or object). ◦ To resize a corner or handle, use VO and two arrow keys (for example, press VO-Right Arrow-Up Arrow to extend the top-right corner of a window or the top-right handle of an object). 5. To stop resizing the window or object, press the Escape key. You can’t use other VoiceOver commands until you stop resizing. Log in to an encrypted account without VoiceOver If you turn on FileVault, you must log in to your account whenever your Mac is restarted or wakes from sleep. VoiceOver and OS X speech services aren’t available in the FileVault login window. Instead, a series of beeps indicates where the cursor is positioned in the login window. 1. After your Mac awakes or starts, determine if the FileVault login window is displayed by pressing Command-F5. If you hear a single beep, the cursor is positioned in the Name field and you can begin logging in. Continue to step 2.
If you don’t hear a single beep, the FileVault login window might not be displayed yet. Wait a minute, then press Command-F5 again. If you still don’t hear a beep, there may be a problem with encryption. Turn off your Mac, then turn it on again. An unencrypted login process will begin during which VoiceOver is available. 2. Type your account name, then press Return. If you hear a double beep, you entered a valid account name. Continue to step 3.
If you hear a single beep, you entered an invalid account name and the cursor remains in the Name field. Keep entering your account name until you hear a double beep. 3. Type your account password, then press Return. If you hear three beeps, you entered a valid password and login proceeds. 
If you hear a double beep, you entered an invalid password and the cursor remains in the Password field. Keep entering your password until you hear three beeps. Chapter 4. Working with Text Text is found in many places, such as in windows and dialogs, in content areas like webpages and help files, and in documents. This chapter explains how to use VoiceOver to read, select, and edit text. Read text VoiceOver provides many ways to read text. TO READ DO THIS From the top (“Read All”) Press VO-A, or flick up with two fingers. You don’t need to interact with the document. From the VoiceOver cursor to the bottom Press VO-A, or flick down with two fingers. You must first interact with the document. A paragraph Press VO-P. To move to the next or previous paragraph, press VO-Shift-Page Down or VO-Shift-Page Up. A line Press VO-L. To move to the next or previous line, press VO-Down Arrow or VO-Up Arrow. A sentence Press VO-S. To move to the next or previous sentence, press VO-Command-Page Down or VO-Command-Page Up. A word Press VO-W. To hear the word spelled, press VO-W again. To hear it spelled phonetically, press VO-W again. To move to the next or previous word, press VO-Right Arrow or VO-Left Arrow. A paragraph, line, sentence, or word using gestures Press the Command key while touching a finger on the trackpad; repeat until you hear the setting you want to use. A character Press VO-C. To hear the character spoken phonetically, press VO-C again. To move to the next or previous character, press VO-Shift-Right Arrow or VO-Shift-Left Arrow. If “Use phonetics” is selected in VoiceOver Utility, characters are read phonetically, as in “a alpha n november t tango.” You can use the commanders in VoiceOver Utility to assign commands to keys that let you fast forward and rewind text when you use Read All. When you use the Down Arrow key to move from one line of text to the next, VoiceOver speaks the line where the insertion point is located. If you press the Down Arrow key at the first line of a document, VoiceOver won’t read the line because the insertion point has moved to the next line. To hear the first line of text in a document, press VO-Down Arrow. The orientation commands VO-F4-F4 and VO-F5-F5-F5 can be useful in determining the insertion point’s location in a document. Orientation commands Scroll to content Scroll content using a VoiceOver command or VoiceOver gestures. Use a VoiceOver command 1. Interact with a scroll area. 2. Interact with content areas 3. To begin scrolling, press VO-Shift-S. You can’t use other VoiceOver commands while you’re scrolling. 4. Scroll the content. If you hear a sound effect, you can’t scroll any farther. 5. Scroll up and down, or left and right: Press the arrow keys.
Scroll one page at a time: Press the Page Up or Page Down key to scroll vertically. Press Shift-Page Up or Shift-Page Down to scroll horizontally. 6. To stop scrolling, press the Escape key. Use VoiceOver gestures • To hear the number of pages or rows that are visible on the current page, tap three fingers. VoiceOver speaks something like “Page 4 of 15 and Horizontal page 1 of 2.” • To scroll one page at a time, flick up, down, left, or right with three fingers. • In the Trackpad Commander pane of VoiceOver Utility, you can select a checkbox to scroll the content (not the scroll bar) down or up. Usually when you move the scroll bar down or up, the content moves in the opposite direction. When the option is selected, the content moves in the same direction you’re scrolling. When you interact with content, the VoiceOver cursor automatically scrolls as it navigates the content. Hear punctuation Change the level of punctuation that VoiceOver reads. 1. To open the rotor to verbosity settings, press VO-V. 2. Press the Left Arrow or Right Arrow key until you hear “punctuation” and the current setting. 3. Press the Up Arrow or Down Arrow key until you hear the setting you want, such as All or None. 4. To close the rotor, press Escape. You can set punctuation options in the Text pane of the Verbosity category in VoiceOver Utility. If you’re using portable preferences on a guest computer when you change punctuation settings, the settings are saved to the portable preferences drive and not to the guest computer. Hear text attribute changes Change how VoiceOver announces changes in text attributes. 1. To open the rotor to verbosity settings, press VO-V. 2. Press the Left Arrow or Right Arrow key until you hear “text attributes” and the current setting. 3. Press the Up Arrow or Down Arrow key until you hear the setting you want. 4. To close the rotor, press Escape. You can set text attribute options in the Text pane of the Verbosity category in VoiceOver Utility. To hear details about the text style closest to the VoiceOver cursor, press VO-T. If you’re using portable preferences on a guest computer when you change text attribute settings, the settings are saved to the portable preferences drive and not to the guest computer. Hear the current selection Find out what, if anything, is selected in the VoiceOver cursor. Press VO-F6, or tap three times. VoiceOver indicates if nothing is selected. Repeat, copy, or save the last spoken phrase • To repeat a phrase, press VO-Z. • To copy a phrase to the Clipboard (or “Pasteboard”), press VO-Shift-C. • To save a phrase as an audio file, press VO-Shift-Z. The file is saved in an archive folder on your desktop. The folder also contains log files that can be used to troubleshoot problems. Select text When cursor tracking is on, you can select text using standard OS X keyboard shortcuts, VoiceOver gestures, or Quick Nav. Use standard OS X shortcuts Select the character to the right or left of the insertion point: Press Shift-Right Arrow or Shift-Left Arrow. Select the word to the right or left of the insertion point: Press Shift-Option-Right Arrow or Shift-Option-Left Arrow. Select the text from the keyboard cursor to the beginning or end of the line: Press Shift-Command-Right Arrow or Shift-Command-Left Arrow. Select the text from the keyboard cursor to the beginning or end of the text area: Press Shift-Command-Up Arrow or Shift-Command-Down Arrow. If you can’t select text using these shortcuts, press VO-Return. Then press the VO keys with arrow keys to read the text you want to select, then press VO-Return again. The text that was read is selected. Use VoiceOver gestures 1. Rotate two fingers on the trackpad until you hear the Characters or Words list, or the Headings, Lines, or Static Text list. 2. To select text from the starting location to the next element in the rotor, pinch your fingers apart. To deselect text, pinch your fingers together. Use Quick Nav 1. Open the Web rotor by pressing Left Arrow-Up Arrow or Right Arrow-Up Arrow. 2. Jump to the Characters or Words list, or the Headings, Lines, or Static Text list, by pressing the Right Arrow and Up Arrow keys together (to jump to the next list) or the Left Arrow and Up Arrow keys together (to jump to the previous list). 3. Navigate the items in a list by pressing the Up Arrow or Down Arrow key, then select an item by pressing Shift-Down Arrow. To deselect an item, press Shift-Up Arrow. To delete selected text, press the Delete key. If you accidentally delete text, try pressing Command-Z to undo the mistake. Hear what you type VoiceOver can speak what you’re typing (known as a “typing echo”). 1. To open the rotor to verbosity settings, press VO-V. 2. Press the Left Arrow or Right Arrow key until you hear “typing echo” and the current setting. 3. Press the Up Arrow or Down Arrow key until you hear the setting you want. 4. To close the rotor, press Escape. You can set the typing echo in the Text pane of the Verbosity category in VoiceOver Utility. In addition, in the Announcements pane of the category, you can set options to have VoiceOver tell you when you press the Caps Lock key or a modifier key. If you’re using portable preferences on a guest computer when you change typing settings, the settings are saved to the portable preferences drive and not to the guest computer. Complete partially entered words When you start typing a word, you can display a list of suggestions for completing the word. 1. As you type, enter as many characters as you know, then press F5 (do not use the VO keys with this command). You may need to press Fn-F5. 2. Press the Down Arrow key until you hear a word that sounds correct. 3. To hear how the word is spelled, press VO-W-W. To hear the word spelled phonetically, press VO-W-W-W. 4. When you hear the word you want to use, press the Space bar.The word you selected replaces the text you typed. Correct misspelled words Many OS X apps, such as TextEdit and Mail, can identify misspelled words as you type, and suggest corrections. Use automatic spelling correction When VoiceOver announces a misspelled word, do one of the following: • To let the word be corrected automatically, keep typing. If the spell checker can’t correct the word, it underlines it in red. You can check the document to manually correct these misspellings. • To choose a suggested correction, press the Down Arrow key, then press the Left Arrow or Right Arrow key until you hear the suggestion you want to use. Then press Return. To exit the suggestions without choosing one, press Escape or the Up Arrow key. • To revert to the original spelling of a word that was automatically corrected, navigate to the word, position the insertion point just after the word, press the Down arrow key to move to the original spelling, then press the Space bar to select it. Correct spelling manually If you chose not to use automatic spelling correction, or a document contains misspelled words for which the spell checker can’t suggest a correction, you can review and correct misspellings manually. 1. Navigate to the first misspelled word and press Command-;. 2. To hear the word spelled, press VO-W-W. If the word’s not actually misspelled, press Command-; until you hear a word that needs to be corrected. 3. To open a shortcut menu of suggestions, dictionaries, and more, press VO-Shift-M. 4. Navigate to the spelling you want to use, then press VO-Space bar to select it. If you don’t hear an acceptable correction, press Escape, press VO-Shift-F4 to move the VoiceOver cursor to the misspelled word, then edit the word manually. If you don’t want spelling to be corrected automatically, choose Edit > Spelling and Grammar, then deselect the Correct Spelling Automatically command (if it’s available). You can set an option for handling misspelled words in the Text pane of the Verbosity category in VoiceOver Utility. Chapter 5. Navigating Content VoiceOver provides numerous ways to navigate content and text. In this chapter, you’ll learn how to navigate content such as tables and text, and how to use navigation features such as Quick Nav, the Item Chooser, and hot spots, among others. Navigate menus The menu bar at the top of the screen contains several menus, such as the Apple and app menus, or the status menus. Navigate to the menu bar Press VO-M, or double-tap with two fingers near the top edge of the trackpad. Navigate in the menu bar Go to a specific menu: Type the first letter of the menu. For example, type “H” to jump to the Help menu. Go to the status menus: Press VO-M-M. Go to the Spotlight menu: Press Command-Space bar. Move among the menus in an area of the menu bar: Press VO-Right Arrow or VO-Left Arrow. A sound effect indicates when you’re at the end of an area. If you’re using VoiceOver gestures, drag a finger across the trackpad to navigate the areas and menus in the menu bar. You hear a sound effect when moving over a blank space. You can also flick left or right to move between menus. Navigate a menu • To open any menu, press VO-Space bar. • To move down or up a menu, press VO-Down Arrow or VO-Up Arrow, or drag a finger down or up. • To move to a submenu, press VO-Right Arrow or flick right. To return to the main menu, press VO-Left Arrow or flick left. Close a menu To exit a menu without selecting an item, press Escape, or scrub back and forth with two fingers. To open a shortcut menu for an item, press VO-Shift-M, or use the customized gesture Control-Trackpad click (you can change this default assignment and assign the command to a different gesture). Navigate tables Navigate tables in text areas by row and column, and sort by column. • In rows: • Hear a row header: Press VO-R.
Hear a row from the VoiceOver cursor to the end of the row: Press VO-R-R. • In columns: • Hear a column header: Press VO-C.
Hear a column from the VoiceOver cursor to the bottom of the column: Press VO-C-C.
Move up or down in a column: Press the Up Arrow or Down Arrow key.
Sort a column: Press VO-| to jump to the sort button in the column header, then press VO-Space bar. You can navigate to other columns and sort them. When you’re done sorting, press VO-|.
If the table also contains a row header, pressing VO-| displays a menu where you choose a column or row header. Press VO-Right Arrow until you hear the header you want, then press the Space bar to jump to the sort button in that header.
Reorder columns: Navigate to the column you want to move, press VO-| to jump to the column header, then press VO-, to mark the column for reordering. Navigate to the header of the column that you want the marked column to precede, then press VO-< to insert the marked column in front of it. When you’re done reordering, press VO-|. • In an outline view, jump to the parent level of the current cell by pressing VO-Command-\. When you’re interacting with a table, VoiceOver doesn’t announce blank columns as you navigate using the arrow keys unless you have the verbosity level for tables set to High. Customize the verbosity level for speech or braille You can have VoiceOver read the header text when it navigates a table row, which is useful for identifying the type of content in each cell of a row. Set this option in the Announcements pane of the Verbosity category in VoiceOver Utility. Navigate by finding text or letters Navigate by searching for specific text or a specific letter. By text Type a phrase in the VoiceOver search panel to navigate to the next occurrence of that phrase. 1. Press VO-F to display the search panel. 2. In the search panel, type or paste the text you’re looking for, then press Return. VoiceOver searches from the VoiceOver cursor to the end of the text area. ◦ To find the next occurrence of the text in the window, press VO-G. ◦ To find the previous occurrence of the text in the window, press VO-Shift-G. 3. To review past searches, press the Up Arrow or Down Arrow key. Before you repeat, delete, or enter a new search, press VO-F. ◦ To repeat a previous search, press Command-A. ◦ To delete a search, press Command-Delete. By letter You can use fast searching to quickly move to the next occurrence of a letter in an element on the screen. To set up fast searching, select the “Enable fast searching” checkbox in the Navigation category in VoiceOver Utility, then choose a Command key to use. • To search for the next element that begins with a specific letter, press the specified Command key and the letter. For example, press Left Command-S. • To search for the previous element that begins with a specific letter, press the specified Command key, the Shift key, and the letter. For example, press Left Command-Shift-S. Navigate using text attributes Navigate in a document by searching for text attributes, such as bold or italic text. • To find the next instance of the specified attribute, press these keys: • Bold text: VO-Command-B
Font change: VO-Command-O
Text that has the same style as the current text: VO-Command-S (if you are not in a text area, VO-Command-S finds the next item that is the same as the current item)
Style change: VO-Command-C
Italic text: VO-Command-I
Color change: VO-Command-K
Underlined text: VO-Command-U
Plain text: VO-Command-P
Graphic: VO-Command-G
Link: VO-Command-L • To find the previous instance of an attribute, use the same commands listed above with the Shift key, as in VO-Command-Shift-B or VO-Command-Shift-L. Navigate using cursor wrapping When you use cursor wrapping, VoiceOver treats the items in a window or column as a continuous loop. Wrap automatically 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click Navigation, then select “Allow cursor wrapping.” 2. To use wrapping, do any of the following: ◦ To wrap from the last item in a window to the top of the window, press VO-Right Arrow. ◦ To wrap from the first item in a window to the bottom of the window, press VO-Left Arrow. ◦ To wrap from an item at the bottom of a column (such as a list) to the first item in the next column, press VO-Down Arrow. ◦ To wrap from an item at the top of a column (such as a list) to the last item in the previous column, press VO-Up Arrow. Wrap only when you choose • To wrap from the last item in a window to the top of the window, press VO-Command-Shift-Right Arrow. • To wrap from the first item in a window to the bottom of the window, press VO-Command-Shift-Left Arrow. • To wrap from an item at the bottom of a column to the first item in the next column, press VO-Command-Shift-Down Arrow. • To wrap from an item at the top of a column to the last item in the previous column, press VO-Command-Shift-Up Arrow. Navigate using the Tab key OS X includes full keyboard access, which lets you use the Tab and arrow keys to move the keyboard focus to text boxes, lists, radio buttons, checkboxes, and other controls. When you turn VoiceOver on, the Full Keyboard Access setting in the Shortcuts pane of Keyboard preferences automatically switches to “All controls.” When you turn VoiceOver off, the setting switches to “Text boxes and lists only.” To change the setting at any time, press Control-F7. When you use the Tab key to navigate while VoiceOver is on, keep these points in mind: • To navigate in reverse, press Shift-Tab. • When the VoiceOver cursor lands on an item, you immediately interact with the item (you don’t need to enter a command). Turn off this automatic interaction in the Navigation category in VoiceOver Utility. Navigate using Quick Nav With Quick Nav, you can navigate webpages and apps using only the arrow keys, and navigate webpages using single keys. Turn Quick Nav on or off Press the Left Arrow and Right Arrow keys at the same time. If you deselected the option to toggle Quick Nav using the arrow keys in the Quick Nav Commander in VoiceOver Utility, this command won’t work. Instead, press VO-H-H to open the Commands menu, type “quick” to search for the Toggle Quick Nav On or Off command, then select it. Navigate apps and webpages using arrows • To move left, right, up, or down, press an arrow key. With Quick Nav, these keys function the same as pressing the VO keys with arrow keys. • To start interacting with an item, press the Right Arrow and Down Arrow keys together. • To stop interacting with an item, press the Left Arrow and Down Arrow keys together. • To perform the default action on the item in the VoiceOver cursor, press the Down Arrow and Up Arrow keys together. Navigate webpages using single keys If you enabled single-key webpage navigation in the Quick Nav Commander in VoiceOver Utility, you can use single keys to navigate webpages. For example, press b or B to navigate to the next or previous button, or 1 or ! to navigate to the next or previous Heading 1. Use the Quick Nav Commander in VoiceOver Utility to change the default single-key assignments, and add your own key assignments. Navigate apps and webpages using the rotor You can use Quick Nav with the Web rotor. • To open the Web rotor, press Left Arrow-Up Arrow or Right Arrow-Up Arrow. • To jump to the next list in the Web rotor, press the Right Arrow and Up Arrow keys together. • To jump to the previous list in the Web rotor, press the Left Arrow and Up Arrow keys together. • To navigate the items displayed in a list in the Web rotor, press the Up Arrow or Down Arrow key. When Quick Nav is on, the Quick Nav arrow and single-key commands are included in the Commands menu. Find commands using the Commands menu Navigate using the Item Chooser Quickly go to any item on the screen or in a window. The Item Chooser menu lists text, controls, links, and graphics. 1. To display the Item Chooser, press VO-I. 2. Navigate the items in the list using the Up Arrow or Down Arrow key until you find the item you want. ◦ If you know the name of an item, such as the Close button, start typing its name to narrow the list to only items that contain those letters. To list all the items again, press the Delete key. ◦ If you don’t find the item you want, press the Escape key to exit the Item Chooser without making a selection. 3. Press Return or the Space bar to select the item and go to it.The Item Chooser closes. Monitor items with hot spots Use hot spots to monitor items and jump to those items at any time. You can set up to ten hot spots; if you use VoiceOver activities, you can set up to ten hot spots for each activity. • To set a hot spot for an item, press VO-Shift-[number key]. If the number key’s already used in a hot spot, the new hot spot replaces the existing one. • To jump to a hot spot, press VO-[number key]. • To hear a description of a hot spot, press VO-Command-[number key]. • To hear value changes in a hot spot, press VO-Command-Shift-[number key]. To stop hearing VoiceOver announce when the item’s value changes, press the command again. • To remove a hot spot, press VO-Shift-[number key] on the hot spot. For example, if you set a hot spot by pressing VO-Shift-5, press VO-5 to jump to that hot spot, then press VO-Shift-5 to remove it. • To display the Hot Spot Chooser, press any hot spot key twice. For example, you might press VO-7-7. You can use VoiceOver Utility to assign hot spot commands to keys or gestures. When you jump to hot spots in tables, lists, or web areas, you can immediately interact with those items (you don’t need to enter a command). You can use hot spots on some non-English keyboards. Chapter 6. Browsing the Internet This chapter provides information about using VoiceOver to browse and navigate webpages effectively using two different navigation modes, items such as tables or web spots, and the VoiceOver Web Item rotor. Ways to browse webpages There are several ways to browse and navigate webpages. • Choose a default navigation mode, by Document Object Model (DOM) or by grouping related items. You can switch between modes to use the mode best suited for the current webpage. • Navigate webpages using DOM or group mode • Use the Web rotor to quickly jump to links, headings, web spots, tables, and more. • Navigate webpages using the Web rotor • Use the web settings of the gestures rotor to navigate using gestures. • Use rotor settings with gestures • With Quick Nav, navigate webpages and apps using only arrow keys, or webpages using single keys. • Navigate using Quick Nav • Use auto web spots and web spots you create to quickly scan webpages. • Navigate webpages using web spots • Hear a summary of a table and its cells as you press the arrow keys to navigate the table. Interact with the table only if you hear something of interest. • Navigate tables on webpages Web developers can assign keyboard shortcuts, called “access keys,” to webpage items such as links and buttons, to make them easier to interact with. VoiceOver can announce when it detects access keys, saying for example “Access key available: s” for a link; then you press Control-S to open the link. To hear access keys, select the option for help tags in VoiceOver Utility (in the Hints pane of the Verbosity category). Hear a summary of a webpage Hear how many headings, links, tables, landmarks, live regions, and more are on a webpage. Press VO-Shift-I. VoiceOver speaks statistics only for the types of items listed in the Web rotor. You can set an option in the Web category of VoiceOver Utility to have the summary read automatically when a webpage opens. Navigate webpages using DOM or group mode VoiceOver provides two modes for navigating webpages: by a webpage’s Document Object Model (DOM), or by grouping related items. Set the default navigation mode Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Web category, click Navigation, then select “DOM order” or “Grouping items.” Switch navigation modes Do one of the following: • When VoiceOver is on, press VO-H-H to display the Commands menu, type “dom” to narrow the list of commands, then select Toggle Web Navigation DOM or Group. • Use VoiceOver Utility to assign the Toggle Web Navigation DOM or Group command to a key, then use that key to switch modes while navigating webpages. • Assign VoiceOver commands to keys Navigate by DOM Navigating by DOM moves left and right, in the order set by the webpage’s author. (Moving up and down in DOM mode is based on the current setting of the Web Item rotor.) To navigate list items, press the VO keys with arrow keys (you don’t need to interact with a list to navigate the list items). Navigate by grouping items Navigating by group moves in any direction, to help give you a sense of context. To navigate list items, interact with the list. You don’t need to interact with groups that contain only one item. When you navigate to a list, VoiceOver indicates the number of items in the list and when it has reached the end of the list. If you use VoiceOver gestures, the current web navigation mode affects how you navigate webpages using the rotor. In DOM mode, flicking up or down moves to the previous or next instance of the item that matches the current rotor setting. In group mode, flicking up or down moves to the previous or next group of related items. Navigate webpages using images • To jump to the next or previous graphic, press VO-Command-G or VO-Command-Shift-G. • If images are listed in the Web rotor, use the rotor to move to a specific image. • Navigate webpages using the Web rotor You can set an option for when to navigate to images in the Navigation category in VoiceOver Utility. If an image doesn’t have a description, VoiceOver speaks the image filename. You can create a custom label for these images, or for images whose alt text isn’t useful. Navigate tables on webpages Navigate tables on webpages by grouping items within the tables. When you navigate tables by grouping, you hear a summary of a table and its cells as you press the arrow keys to navigate. You don’t need to interact with the table unless you hear something that you want to explore in detail. You can use a VoiceOver command to turn grouping on or off. Turn on grouping for all tables Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Web category, click Navigation, then select “Group items within.” Turn grouping on or off for the current table Press VO-=. Only the table you’re currently in is affected by this command; other tables will still use the setting specified in VoiceOver Utility. VoiceOver remembers the setting for the current table and will use it each time you navigate to that table. When you turn off grouping for a table, you must interact with the table. Navigate tables when grouped • To move to the first cell in the table, press VO-Home. To move to the last cell, press VO-End. • To move from the table to the first item on the webpage, press VO-Shift-Home. To move to the last item on the webpage, press VO-Shift-End. • To move from a cell in the last row to the first row of the next column, press the Down Arrow key. • To exit a table when you’re on the first cell, press the Up Arrow or Left Arrow key. When you’re on the last cell, press the Down Arrow or Right Arrow key. When you’re navigating tables without grouping, you can navigate more quickly to the next column by pressing VO-Command-Y or navigate to the previous column by pressing VO-Command-Shift-Y. Navigate webpages using live regions Webpages can contain areas, called “live regions,” whose content is updated without refreshing the entire page. VoiceOver can detect live regions, even when the focus is elsewhere on a webpage, and speak the content in the live region as it changes. • To enable all live regions, open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Web category, then select Enable Live Regions. • To enable a specific live region (if live regions are listed in the Web rotor), use the rotor to move to a live region, then press the O key to turn the live region on or off. You can specify gestures, keys, or input keys on a refreshable braille display to work with live regions. Navigate webpages using landmarks Web developers can assign landmark roles to areas of a webpage to help screen readers identify the types of content on the webpage. For an example of a webpage that contains landmarks, visit store.apple.com. VoiceOver supports all landmarks, including: Banner: The area that contains the page name, logo, or other identifying information. Complementary: An area, such as a sidebar, that supports the main content area. Content info: The area that contains footnote-type information, such as copyright or privacy statements. Main: The area that contains the main content. Navigation: The area that contains a navigation bar or other links for navigating the webpage or website. Search: The area that contains a search field for searching the webpage or website. If landmarks are listed in the Web rotor, you can use the rotor to move to a specific landmark. Navigate webpages using the Web rotor You can use the Trackpad, NumPad, Keyboard, and Quick Nav Commanders to specify gestures or keys for navigating to the next or previous landmark on a webpage. You can also specify input keys on a refreshable braille display to navigate to landmarks. Navigate webpages using web spots As VoiceOver opens a webpage, it evaluates the visual design, groups items based on the design, and creates an “auto web spot” on the first item in each group. VoiceOver briefly outlines the group with a large rectangle, which transitions into the VoiceOver cursor, positioned on the first auto web spot in the first group. You use commands or the Web rotor to jump from one auto web spot to another on the webpage. You can create your own web spots to mark favorite content. If you mark one of your web spots as the “sweet spot,” it appears first in the list of web spots in the Web rotor. • To create a web spot, press VO-Command-Shift-}. You can create an unlimited number of web spots for a webpage. • To remove a web spot, press VO-Command-Shift-{. You can delete only web spots you create. • To set a sweet spot, press VO-Command-Shift-}-}. • To jump to the next or previous auto web spot, press VO-Command-N or VO-Command-Shift-N. • To jump to the next or previous web spot you created, press VO-Command-] or VO-Command-[. If the design of a webpage changes significantly and VoiceOver can’t locate a web spot that previously existed on the page, it creates a new one that closely matches the original one. You can set an option in the Page Loading pane of the Web category in VoiceOver Utility to have the VoiceOver cursor focused on the sweet spot when the webpage opens. Navigate webpages using frames If a webpage organizes information into areas called “frames,” you can navigate the page using them. • To move to the next frame, press VO-Command-F. • To move to the previous frame, press VO-Command-Shift-F. If frames are listed in the Web rotor, you can use the rotor to move to a specific frame. Navigate webpages using the Web rotor When you browse a webpage, you can use the Web rotor to jump directly to an item on the page, such as a heading or a link, or to navigate the page line by line. 1. While browsing a webpage, open the Web rotor by pressing VO-U. 2. Navigate the lists using the Right Arrow or Left Arrow key until you hear the list you want, such as Headings or Links. 3. Navigate the items in the list using the Up Arrow or Down Arrow key until you find the item you want. ◦ If you know the name of an item in a list, type some letters of its name to narrow the list to only items that contain those letters. If you’re in the Headings list, you can type the heading level (such as 3) to narrow the list to only headings of that level. To show all items in the list again, press the Delete key. ◦ To hear an item’s Internet address, if applicable, press VO-Shift-U. To hear the item’s help tag, if available, press VO-Shift-H. ◦ If you don’t find the item you want, press the Escape key to exit the rotor without making a selection. 4. Press Return or the Space bar to select the item and jump to it on the webpage. The Web rotor closes. You can choose the types of items that are listed in the Web rotor. Customize the Web rotor If you’re using VoiceOver gestures, you can access the web-related rotor settings with a gesture. Chapter 7. Collaborating with Other Users This chapter explains how to use features that enhance collaboration between users. You’ll learn about the caption panel, the braille panel, the screen curtain, and tiling visuals. Use the caption panel The caption panel shows what VoiceOver is speaking, and can be helpful when sharing your Mac with sighted users. Show or hide the panel Do one of the following: • Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Visuals category, then click Caption Panel. • Press VO-Command-F10. To show or hide the caption panel, as well as the braille panel and the VoiceOver cursor, press VO-Command-F11. Move or resize the panel 1. Press VO-Shift-F10 until you hear the action you want to perform. For example, if you hear “resizing” but you want to move the caption panel, press the keys again to hear “moving.” 2. Press the VO keys with arrow keys to move or resize the caption panel. 3. When you’re done, press the Escape key. Turn the screen black using screen curtain Prevent people from seeing what’s on your screen by using the screen curtain, which turns the screen black. Press VO-Shift-F11, or triple-tap with three fingers. To turn off the screen curtain, repeat the command or gesture. If you turn off VoiceOver while the screen curtain is on, the screen curtain is also turned off. Use the braille panel Show a panel on the screen that simulates a refreshable braille display, along with a language translation of the braille. Show or hide the panel Do one of the following: • Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Visuals category, click Braille Panel, then choose an option for showing the panel. • Press VO-Command-F9. This command also changes the setting in VoiceOver Utility. If you set the option to automatically show the braille panel when a braille display is connected or paired with your Mac, you must choose that setting again in VoiceOver Utility. To show or hide the braille panel, as well as the caption panel and the VoiceOver cursor, press VO-Command-F11. Move or resize the panel 1. Press VO-Shift-F9 until you hear the action you want to perform. For example, if you hear “resizing” but you want to move the braille panel, press the keys again to hear “moving.” 2. Press the VO keys with arrow keys to move or resize the braille panel. 3. When you’re done, press the Escape key. A resized braille panel can show more cells than may be on the connected braille display; in this case, a thin rectangular line around some cells indicates the braille cells on the physical display. The braille panel displays what’s on the screen even when you mute speech. Tile visuals Tile the VoiceOver cursor, the caption and braille panels, and VoiceOver menus on the screen. • Press VO-F10. If you’re using a portable Mac, you may need to press VO-Fn-F10.
The caption or braille panel moves to the top or bottom center of the screen, while the item in the VoiceOver cursor moves to the center of the screen and the rest of the screen is dimmed. As you navigate, the VoiceOver cursor stays in the center of the screen and you see the item you navigated to. • To untile visuals, press VO-F10 again. Chapter 8. Customizing VoiceOver This chapter explains how to customize your VoiceOver environment to suit your needs. You’ll learn how to customize settings for voices, spoken details, braille displays, pronunciations, and more. You’ll also learn how to reset, export, and import your preferences, as well as use portable preferences and VoiceOver activities. Customize voice settings Change the speaking voice used by VoiceOver, and settings such as rate or pitch. 1. To hear the first setting, press VO-Command-Right Arrow. 2. Continue to press VO-Command-Right Arrow until you hear the setting you want to adjust. 3. To increase the setting’s value, press VO-Command-Up Arrow. To decrease the value, press VO-Command-Down Arrow. The new settings are applied only to the default voice. You can set options for voices, and add compact or premium voices, in the Voices pane of the Speech category in VoiceOver Utility. If you install voices that are compatible with OS X in your ~/Library/Speech/Voices folder, they appear in the list of available voices. To make the voices available to other users who have access to your Mac, install the voices in /Library/Speech/Voices. If you’re using portable preferences on a guest computer when you change voice settings, the settings are saved to the portable preferences drive and not to the guest computer. Customize the verbosity level for speech or braille By default, VoiceOver provides a high level of detail to help new Mac and VoiceOver users. 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Verbosity category, then click Speech or Braille (if you use a refreshable braille display). 2. Choose a different default setting, and a verbosity level for specific controls, such as checkboxes or scroll areas. Customize the Web rotor Change the Web rotor to list only the items that you use most often to browse webpages, such as links or tables. 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Web category, then click Web Rotor. 2. Select the checkbox for each item to include in the Web rotor. To change the order of items in the rotor, select an item, then press Command-Up Arrow or Command-Down Arrow. The items you include in the rotor determine the statistics VoiceOver speaks in the webpage summary. Customize how text and symbols are pronounced Specify how you want VoiceOver to pronounce certain text or symbols by providing substitutions for them. For example, you can substitute “8 oh 2 dot eleven b” for “8 zero 2 point one one b.” 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Speech category, click Pronunciation, then click Add (+). 2. In the new row, type the text whose pronunciation you want to customize, press Tab to move to the Substitution column, then type how you want VoiceOver to pronounce the text. ◦ To specify an app where VoiceOver should use the pronunciation, choose the app from the pop-up menu. The menu lists open apps and Find App, so you can select an app that isn’t open. To use the pronunciation in any app, leave All Apps selected. ◦ To have capitalization ignored, select the Ignore Case checkbox. You can customize pronunciations by using the commanders to assign the Add Pronunciation command to a key or gesture. The command displays a dialog to add a new pronunciation, which is added to the list in the Pronunciation pane. Create custom labels Create or rename the label for user interface elements (such as images, buttons, tables, and more) and for links. You can export your custom labels to a file to share with other users. 1. Position the VoiceOver cursor on the element or link for which you want to create a label. 2. Press VO-/. 3. In the dialog that’s displayed, type the label you want to use, then press Return. When you create a custom label, VoiceOver associates pertinent information about the element or link and its location with your label. If the element or link changes in a significant way, such as moving to a new location, VoiceOver may not recognize it as the same element or link. If this happens, re-create the custom label. You can’t create labels for scroll areas, toolbars, or groups. When you import a preference file that contains custom labels, VoiceOver merges those labels with your current set of custom labels. Assign VoiceOver commands to keys Assign VoiceOver commands to the keys of your keyboard or the numeric keypad (if available). To use the default key assignments, just enable the commanders. 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Commanders category, click NumPad or Keyboard, then enable the commander. 2. Choose a modifier key. A modifier is optional for numeric keypad keys; you must use a modifier with keyboard keys. 3. Interact with the commander table and navigate down the key column until you hear the key you want to customize. 4. Interact with content areas 5. In the Command column, open the pop-up menu of commands, navigate the available commands until you hear the one you want, then press Return. Use the Custom Commands menu to assign scripts and Automator workflows to gestures.
 When the NumPad Commander is on, its commands are included in the VoiceOver Commands menu. Reset preferences Reset basic, custom (such as hot spots or Keyboard Commander key assignments), or all VoiceOver preferences to their default values. IMPORTANT:Export your preferences first, so you have a backup copy. Export and import preferences Open VoiceOver Utility (press VO-F8 when VoiceOver is on), choose File, then choose a reset command. If your portable preferences are on a removable storage drive and you reset basic or all VoiceOver preferences on your Mac, VoiceOver no longer recognizes the drive and doesn’t sync VoiceOver preferences on your Mac and the drive. To sync VoiceOver preferences again, you must set up the portable preferences drive again. Export and import preferences Export all or specific VoiceOver preferences to a file as a backup copy. Export preferences 1. In VoiceOver Utility, choose File > Export Preferences. 2. Select where to save the file, choose the type of preferences to export from the pop-up menu, then click Save. The default filename indicates the type of preferences exported and has the filename extension “voprefs.” The file will not reflect changes you make to preferences after the export. Import preferences 1. In VoiceOver Utility, choose File > Import Preferences. 2. Select the preferences file to import, then click Open. VoiceOver replaces the current preferences of that type with those in the file. If you’re importing web spots or labels, VoiceOver merges them with your existing web spots or labels. You can import preference files from VoiceOver in Mac OS X 10.5 or later. If a preference is no longer available in VoiceOver, it’s not imported. Use portable preferences Make your VoiceOver preferences “portable” by storing them on a removable storage device. You can then easily use your settings on other Mac computers and keep an up-to-date copy of your current settings always available. Set up the portable preferences drive Do this set of steps once for each removable drive you want to use. 1. Insert the removable drive in your Mac. 2. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), then choose File > Set Up Portable Preferences or click Set Up in the General category. 3. Select a drive from the list of removable drives, then click OK. VoiceOver creates a VoiceOver folder on the drive. Use the portable preferences drive When you connect your portable preferences drive to a Mac, VoiceOver detects the drive and asks if you want to use it. How VoiceOver uses the portable preferences drive depends on the Mac you’re using: If you’re using the Mac where you set up the drive: Any changes you make to VoiceOver preferences until you eject the drive are automatically saved to the drive. For example, if you increase the speech rate, your change is instantly saved to the portable preferences drive. If you’re using another Mac (as a guest): VoiceOver uses the preferences stored on the drive. Any changes you make to VoiceOver preferences until you eject the drive are automatically saved to the drive and not to the guest computer. The next time you use the drive on the Mac where it was set up, VoiceOver synchronizes preferences on the Mac and the drive, based on the most recent change to a preference. Stop using the portable preferences drive When you’re done, eject the portable preferences drive using the Finder, or click Stop in the General category in VoiceOver Utility (in this case, the drive is not ejected). If you choose not to use the portable preferences drive when VoiceOver asks you, but later want to use it, open VoiceOver Utility, then click Start in the General category. If you choose to always use the portable preferences drive, but later want to use it only sometimes, delete the preferences file from the drive, then set up the portable preferences drive again. If you have portable preferences on a removable storage drive and you reset basic or all VoiceOver preferences on your Mac, you must set up the portable preferences drive again. Use VoiceOver activities Use VoiceOver activities to create groups of preferences for specific uses. For example, create an activity to use a certain voice and faster speaking rate when you shop online, then create a second activity to use a different voice and slower speaking rate when you read online articles. Set up activities 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Activities category, then click Add (+) to create an activity. 2. Type a name for the activity, such as “Online Shopping.” To rename an activity, select the activity in the table, press Enter, then type a new name. 3. For each preference you want to customize for this activity, select the checkbox, then click Set. To show all the preferences you can include, click the disclosure triangle to the far right of Hot Spots. 4. To have VoiceOver automatically use the activity for certain apps, click the Select Apps button, then choose apps from the list, or browse for apps. An app can be associated with only one activity. If you select an app that’s associated with another activity, you’re asked if you want to change it.
To disassociate an app, select it again; the checkmark next to its name is removed. Use an activity • If you switch to or open an app with which you associated an activity, VoiceOver identifies the activity (if verbosity is set to Medium or High). • To manually choose an activity to use, press VO-X to display the Activity Chooser, use the Down Arrow and Up Arrow keys to navigate the list until you find the one you want to use, then press Return. • To use the previous activity, press VO-X-X. • To exit the Activity Chooser without making a selection, press the Escape key. Chapter 9. Using Braille Displays This chapter provides information about using refreshable braille displays, both plug in and Bluetooth, with VoiceOver. This chapter includes a list of the braille displays that VoiceOver supports. About refreshable braille displays If you connect or pair a supported braille display to your Mac, VoiceOver detects it and sends it information about what’s displayed on the screen. You can connect multiple braille displays to your Mac; each display will mirror the same content at the same time, useful in a classroom setting. By default, VoiceOver displays uncontracted braille, which you can also display using eight-dot braille. Or you can use contracted braille; if you do, VoiceOver dynamically changes the display under the cursor to uncontracted braille, so that you can read and edit more easily, and then changes back to contracted braille when you move the cursor. A braille display typically describes the entire line where the VoiceOver cursor is focused. For example, when the VoiceOver cursor is focused on an item in a window, the braille device displays items like icons, checkboxes, and pop-up menus, as well as text to the left and right of the VoiceOver cursor. If a line is too wide to fit on the braille display, you can “pan” the line using the left and right buttons on the display. Each left or right pan moves according to the number of cells (including status cells) your display contains. When you move the VoiceOver cursor, the braille display pans when necessary to follow it, even wrapping to the previous or next line. VoiceOver raises dots 7 and 8 to indicate the position of the VoiceOver cursor and, when you edit or select text, the text selection. VoiceOver indicates the position of the text selection cursor, called the “I-beam,” by flashing dot 8 of the braille cell preceding the I-beam and dot 7 of the braille cell trailing it. VoiceOver uses three status cells to provide additional information about what’s on the screen. You can set the number of status cells that are used and their location on the braille display. For example, you can use the cell that shows text status and set its location to be on the left of your display. Use VoiceOver Utility to assign VoiceOver commands to keys on your braille display. If your braille display has a Perkins-style keyboard, you can type on it. Pair a Bluetooth braille display Before you can use a supported Bluetooth braille display with VoiceOver, you must pair the display with your Mac. 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Braille category, click Displays, then click Add (+). VoiceOver lists displays that are within range of your Mac and that appear to match a VoiceOver braille display driver. If your display isn’t shown, make sure you set it to be discoverable. For more information, check the documentation that came with your braille display. 2. In the list of devices, click Pair for your Bluetooth braille display. A common default passcode is used to pair your display. You can pair one Bluetooth braille display at a time. ◦ If your display is successfully paired, VoiceOver detects your paired display whenever it’s turned on and within range; if it’s your primary braille display, you can then use it. It remains paired until you remove it from the list of devices. ◦ If unsuccessful, click the Option button that appears, then provide the pairing passcode that came with your braille display. 3. Click Select. If the Bluetooth braille display you selected doesn’t work with VoiceOver, it’s likely that its driver doesn’t match a VoiceOver driver. Try pairing and selecting a different Bluetooth braille display. Use router keys on a braille display Many braille displays have router keys above the braille cells that you can use to move the cursor. Generally, you press the router key above a particular item in the line of braille to move the VoiceOver cursor or selection to that item. Pressing a router key over a control moves the VoiceOver cursor to that control. If the VoiceOver cursor is already on that control, pressing the router key performs the control’s default action. For example, to click a button, press the router key to move the VoiceOver cursor to the button, then press the router key again to click the button. You don’t have to touch the computer’s keyboard. Similarly, when you’re reading or navigating text and you press a router key, the VoiceOver cursor moves to that location in text. You can also press the router key above a status cell to display an expanded braille description of each dot in the cell. To exit the description, press any other router key. Show status information on a braille display The cells of a braille display show the content of the line where the VoiceOver cursor is focused. If your braille display has dedicated status cells, VoiceOver can use them to show additional information about the line. 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Braille category, then click Layout. 2. Select one or more of the checkboxes next to Status Cells. If you don’t select any checkboxes, status isn’t shown, and the reading cells are used to show the content of the current line. To display an expanded braille description of each dot in the cell, press the router key above a status cell. To exit the description, press any other router key. If your braille display doesn’t have status cells, VoiceOver uses the first one to three cells on the left or right to show status. VoiceOver reserves another cell, which it leaves blank, as a separator between the status cells and the other cells. Review announcements on a braille display VoiceOver sends announcements to your braille display about events that aren’t represented visually on the screen, such as when an app in the background needs attention. VoiceOver stores up to 30 announcements in the history, with the most recent one listed first. To review the announcements, you must set the option to show general display status in the Layout pane of the Braille category in VoiceOver Utility. • On the status cell that shows general display status, dot 1 indicates whether there are new unread announcements. Dot 2 indicates whether the current announcement has already been read. • If you assigned the Announcement History command to a braille display key, press that key to show the most recent announcement in the reading cells. • To cycle through the announcement history, press the Up Arrow key to move backward to the oldest announcement, and press the Down Arrow key to move forward to the most recent announcement. When you’re done reviewing announcements, press any router key above the announcement to redisplay the current line. Assign VoiceOver commands to braille display keys VoiceOver detects whether your braille display provides input keys and assigns common VoiceOver commands to the keys. For example, VoiceOver might assign the Down command to the D3 key; when you press that key on your braille display, the VoiceOver cursor moves down one line on the screen. 1. With your braille display connected to or paired with your Mac and with VoiceOver on, open VoiceOver Utility by pressing VO-F8. 2. Click the Braille category, click Displays, select the braille display you want to assign commands for, then click Assign Commands. 3. Assign a VoiceOver command to braille display keys. ◦ To change the command assigned to keys, navigate to the keys, then choose a command from the pop-up menu. ◦ To add new braille keys so you can assign a command to them, click Add (+) to add a row, press Command-B, then within five seconds press the braille keys you want to add. A sound effect counts down the seconds. Then choose the command to assign to the keys from the pop-up menu. Mirror a braille display Connect multiple USB braille displays to your Mac and have all of them display the same braille output at the same time. The braille displays can be of different types, models, and sizes. 1. Connect or pair your Mac with the braille display you want to use to control other braille displays. This display is called the “primary braille display.” 2. In the Displays pane of the Braille category in VoiceOver Utility, select the braille display, then select the “Primary braille display” checkbox in the display information section. To prevent input from other braille displays that are connected to your Mac, choose “Primary braille display” from the “Allow input from” pop-up menu. 3. Connect additional braille displays to your Mac. These displays will mirror the output from the primary braille display. Supported braille displays OS X supports a wide range of USB and Bluetooth braille displays. MANUFACTURER MODEL Alva BC640 (USB and Bluetooth) BC680 (USB and Bluetooth) 544 Satellite 544 Satellite Traveller 570 Satellite Pro 584 Satellite Pro American Printing House for the Blind (APH) Refreshabraille 18 (USB and Bluetooth) Baum PocketVario 24 (USB and Bluetooth) Pronto! 18 (USB and Bluetooth) Pronto! 40 (USB and Bluetooth) SuperVario 32 (USB and Bluetooth) SuperVario 40 (USB and Bluetooth) SuperVario 64 (USB and Bluetooth) SuperVario 80 (USB and Bluetooth) VarioConnect 12, also called Conny 12 (Bluetooth) Note: VoiceOver identifies this display as HumanWare BrailleConnect 12. VarioConnect 24 (USB and Bluetooth) VarioConnect 32 (USB and Bluetooth) VarioConnect 40 (USB and Bluetooth) VarioPro 64 VarioPro 80 Deininger Pegasus 42/4 CR Pegasus 82/8 CR Eurobraille Esys 12 (USB and Bluetooth) Esys 24 (USB and Bluetooth) Esys 40 (USB and Bluetooth) Esys Light 40 (USB and Bluetooth) Esys 64 (USB and Bluetooth) Esys 80 (USB and Bluetooth) Esytime 32 (USB) Freedom Scientific Focus 14 Blue (USB and Bluetooth) Focus 40 Focus 40 Blue (USB and Bluetooth) Focus 44 Focus 70 Focus 80 Focus 80 Blue (USB and Bluetooth) Focus 84 PAC Mate 20 PAC Mate 40 PAC Mate BX420 (display only) PAC Mate BX440 (display only) PAC Mate QX420 (display only) PAC Mate QX440 (display only) HandyTech Active Braille 40 (USB and Bluetooth) Basic Braille 40 (USB and Bluetooth) Basic Braille 48 (USB and Bluetooth) Basic Braille 64 (USB and Bluetooth) Braille Star 40 (USB and Bluetooth) Braille Star 80 Braille Wave (USB and Bluetooth) Braillino (Bluetooth) Easy Braille (USB and Bluetooth) Modular Evolution 64 Modular Evolution 88 Harpo BraillePen (Bluetooth) BraillePen 12 (Bluetooth) HIMS Braille EDGE 40 (USB and Bluetooth) Braille Sense OnHand (USB and Bluetooth) HIMS/GW Micro BrailleSense (USB and Bluetooth, requiring a Bluetooth module) BrailleSense Plus (USB and Bluetooth, not requiring a Bluetooth module) SyncBraille 20 SyncBraille 32 HumanWare BrailleConnect 12 (Bluetooth) BrailleConnect 24 (USB and Bluetooth) BrailleConnect 32 (USB and Bluetooth) BrailleConnect 40 (USB and Bluetooth) BrailleNote Apex BT (USB and Bluetooth) BrailleNote Apex QT (USB and Bluetooth) Note: VoiceOver supports only the navigation keys on this display. BrailleNote mPower BT 18 (Bluetooth) BrailleNote mPower BT 32 (Bluetooth) BrailleNote PK (Bluetooth) Note: VoiceOver identifies this display as HumanWare BrailleNote mPower BT 18. Brailliant 24 (USB and Bluetooth) Brailliant 32 (USB and Bluetooth) Brailliant 40 (USB and Bluetooth) Brailliant 64 (USB and Bluetooth) Brailliant 80 (USB and Bluetooth) Brailliant B 80 (USB and Bluetooth) Brailliant BI 32 (USB and Bluetooth) Brailliant BI 40 (USB and Bluetooth) KGS Braille Memo Pocket (BMPocket) 16 (USB and Bluetooth) MDV Lilli MB408L (Bluetooth) Ninepoint Systems Cebra Ninepoint (Bluetooth) Novem (USB) Nippon Telesoft Mini Seika 8 (USB and Bluetooth) Mini Seika 16 (USB and Bluetooth) Seika Version 3 Seika Version 4 (USB and Bluetooth) Seika v5 (USB and Bluetooth) Seika 80 Optelec EasyLink (Bluetooth) EasyLink 12 (Bluetooth) Voyager 44 Papenmeier Braillex EL 40s Braillex EL 80s Braillex Trio (USB and Bluetooth) Chapter 10. Using VoiceOver Gestures This chapter explains how to control your Mac using VoiceOver gestures on a Multi-Touch trackpad. About VoiceOver gestures If you have a Multi-Touch trackpad and VoiceOver is on, you can enable the Trackpad Commander and then use gestures to navigate and interact with items on the screen, and enter VoiceOver commands. VoiceOver gestures involve using one or more fingers to drag, tap, flick, or rotate on the trackpad. You can use different techniques for a gesture. For example, you can tap using two fingers from one hand, or one finger from each hand. You can use keyboard help to practice standard and customized gestures and learn what they do. The trackpad represents the window or area on the screen where the VoiceOver cursor is located. When you drag a finger on the trackpad, you move the VoiceOver cursor only in that window or area. VoiceOver speaks the items in the VoiceOver cursor as you move the cursor, and plays a sound effect whenever it encounters a blank space on the screen. This information helps you gain a sense of the actual location of items on the screen as you navigate. For example, if the cursor is in the Mail toolbar, the trackpad represents the Mail toolbar. When you drag your finger on the trackpad, you move the VoiceOver cursor in the Mail toolbar. Because the trackpad represents only a specific area and not the entire screen, you can’t stray to other areas or apps by accident. To enhance collaboration with sighted users, VoiceOver makes the area of the screen you’re working in more visible by dimming the rest of the screen. Other collaboration features, such as the caption or braille panels, can be used at the same time as VoiceOver gestures. Use VoiceOver gestures If you have a Multi-Touch trackpad and the Trackpad Commander is enabled, you can use VoiceOver gestures to navigate and interact with items on the screen. To enable the Trackpad Commander, hold down the Control and Option keys (the “VO keys”) and rotate two fingers clockwise anywhere on the trackpad. To disable it, hold down the VO keys and rotate two fingers counterclockwise. • VoiceOver includes standard gestures for navigating and interacting with items on the screen. You can’t change these gestures. • VoiceOver standard gestures • You can customize other gestures by assigning VoiceOver commands to them. • Assign VoiceOver commands to gestures • You can use a rotor to navigate text areas, windows, dialogs, and webpages, and adjust controls such as sliders, steppers, and splitters. • Use rotor settings with gestures • If you don’t know your location on the screen, tap three times. VoiceOver tells you what’s in the VoiceOver cursor. • When you drag a finger and you hear something you want to select, keep your finger on the trackpad and use a second finger to tap. This gesture is called a “split-tap.” When you use VoiceOver gestures, you can’t use the mouse button on the trackpad, unless the mouse button is used with a modifier key, as in Control-click. Assign VoiceOver commands to gestures Customize some VoiceOver gestures by assigning specific VoiceOver commands to them. NOTE:VoiceOver includes a set of standard VoiceOver gestures, which you can’t change. VoiceOver standard gestures 1. Open VoiceOver Utility (press VO-F8 when VoiceOver is on), click the Commanders category, then click Trackpad. 2. Make sure Enable Trackpad Commander is selected, then click Assign Commands. 3. From the pop-up menu, choose a modifier key, such as Command or Shift, to use with your customized gestures. 4. Interact with the Trackpad Gesture Commands table, then navigate down the Trackpad Gesture column until you hear the gesture you want to customize. 5. Interact with content areas 6. In the Command column, open the pop-up menu of commands, navigate the available commands until you hear the one you want, then press Return. Use the Custom Commands menu to assign scripts and Automator workflows to gestures. Use rotor settings with gestures If you’re using VoiceOver gestures, the rotor is like a virtual dial you turn to change how you navigate, based on the current context. For example, when you’re browsing a webpage, use settings such as tables, web spots, or links. In other contexts, use settings such as navigation, words, or characters. 1. Rotate two fingers anywhere on the trackpad until you hear the setting you want to use.As you “turn” the rotor, VoiceOver speaks each setting and plays a clicking sound. If you miss a setting, keep turning the rotor until you hear the setting again. 2. Flick up or down to navigate to the previous or next instance of an item, based on the current setting. For example, if the current setting is Words, flicking down moves the VoiceOver cursor to the next word. Keep flicking down to move forward word by word. If you repeatedly flick up, the VoiceOver cursor moves backward word by word.
Here are some of the settings you can use: 3. Web settings: The settings depend on how you’ve customized the Web rotor in VoiceOver Utility. By default, the settings include Links, Headings, Form Controls, Web Spots, Tables, and Landmarks.
Other settings: Characters, Words, Navigation. The Characters and Words settings are most useful when interacting with a text area, to read the text by character or by word. The Navigation setting navigates text line by line. When you’re interacting with a text area, VoiceOver begins speaking the first line at the point where the cursor was located when you first flicked up or down; it speaks each subsequent line in its entirety. When you use the Navigation setting in a window or dialog, VoiceOver might not speak all of the items on a line, depending on how the items are arranged. You may need to flick left or right and then flick up or down again to hear other items. The current web navigation mode affects how you navigate webpages using the rotor. In DOM mode, flicking up or down moves to the previous or next instance of the item that matches the current rotor setting. For example, if the rotor is set to Headings, flicking up or down moves to the previous or next heading. You can assign the “Toggle Web Navigation DOM or Group” command to a gesture using the Trackpad Commander, to easily switch modes to suit your needs. Appendix A. Commands and Gestures This appendix lists VoiceOver commands and gestures, organized into categories. General commands Use these commands to turn VoiceOver on and off, get help, change basic settings, and enable and disable commanders. NOTE:If your keyboard has an Fn key, press it when you press a function key. ACTION COMMAND Turn VoiceOver on or off Command-F5 Lock and unlock the VO (Control and Option) keys VO-; Open VoiceOver Utility VO-F8 Start keyboard help VO-K Open the VoiceOver Help menu VO-H Open the VoiceOver Quick Start VO-Command-F8 Open VoiceOver online help VO-? Read the help tag for the current item VO-Shift-H Read the VoiceOver hint for the current item VO-Shift-N Open the Commands menu VO-H-H Open the Find Commands menu VO-Shift-F Close a menu or rotor, stop an action, or exit a mode Escape Tell VoiceOver to ignore the next key or key combination you press VO-Tab Open the Verbosity rotor VO-V Then press the Left Arrow or Right Arrow key to choose the setting. Use the Up Arrow and Down Arrow keys to change the level for the setting. Increase magnification of the item in the VoiceOver cursor VO-} Decrease magnification of the item in the VoiceOver cursor VO-{ Temporarily hide or show the VoiceOver cursor and the caption or braille panels VO-Command-F11 Hide or show the caption panel only VO-Command-F10 Resize or move the caption panel VO-Shift-F10 Press again to cycle through these actions. Then use the arrow keys to resize the panel or move it. Hide or show the braille panel only VO-Command-F9 Resize or move the braille panel VO-Shift-F9 Press again to cycle through these actions. Then use the arrow keys to resize the panel or move it. Tile visuals (dim the screen, highlight the caption or braille panel, and show the item in the VoiceOver cursor in the center of the screen). VO-F10 Press again to return to the normal view. Enable or disable the NumPad Commander VO-Clear Enable or disable the Keyboard Commander VO-Shift-K Enable or disable the Trackpad Commander Press the VO (Control and Option) keys and rotate two fingers clockwise (enable) or counterclockwise (disable) Turn the screen curtain on or off VO-Shift-F11 Cycle through speech settings in the rotor (rate, pitch, volume, intonation, voice) VO-Command-Right Arrow or Left Arrow Increase or decrease the current speech setting (rate, pitch, volume, intonation, voice) VO-Command-Up Arrow or Down Arrow Interaction commands Use these commands to interact with items on the screen. NOTE:If your keyboard has an Fn key, press it when you press a function key. ACTION COMMAND Start interacting with an item VO-Shift-Down Arrow Stop interacting with an item VO-Shift-Up Arrow Perform the default action for the item in the VoiceOver cursor VO-Space bar Click the mouse VO-Shift-Space bar Double-click the mouse VO-Shift-Space bar-Space bar Start multiple selection in a list or table, and select each item VO-Command-Return To stop multiple selection, cut or copy the selected items, press Escape, or stop interacting with the list or table in which the items are located. Perform a sticky mouse down or mouse up (for use when dragging an item from one location to drop in another location) VO-Command-Shift-Space bar Select a menu or list item VO-Return Open or close a disclosure triangle VO-\ Read the row header in a table VO-R Read the contents of a table row from the location of the VoiceOver cursor to the end of the row VO-R-R Read the column header in a table VO-C Read the contents of a table column from the location of the VoiceOver cursor to the bottom of the column VO-C-C Read row and column numbers in a table VO-Shift-T Read the number of columns and rows (the dimensions) in a table VO-Shift-T-T Interact with scroll bars VO-Shift-S Then use the arrow keys to scroll up or down or side to side. To scroll vertically one page at a time, use Page Up and Page Down. To scroll horizontally one page at a time, use Shift-Page Up and Shift-Page Down. Resize a window VO-~ From the menu, choose Resize, Resize and Move to Grid, or Resize and Move to Section. Then navigate to a submenu where you can choose to resize an edge or corner, resize and move to an area of a grid such as the top left, or resize and move to a section, such as the bottom half. To resize an edge, use the VO and arrow keys (for example, press VO-Right Arrow to extend the right edge of a window). To resize a corner, use VO and two arrow keys (for example, press VO-Right Arrow-Up Arrow to extend the top-right corner of a window). Move a window VO-` Then use the VO and arrow keys (for example, press VO-Left Arrow to move a window left). To move a window diagonally, use VO and two arrow keys (for example, press VO-Left Arrow-Up Arrow to move a window diagonally left and up). Resize an object VO-Command-~ From the menu, choose Resize, Resize and Move to Grid, or Resize and Move to Section. Then navigate to a submenu where you can choose to resize an edge or handle, resize and move to an area of a grid such as the top left, or resize and move to a section, such as the bottom half. To resize an edge, use the VO and arrow keys (for example, press VO-Right Arrow to extend the right edge of an object). To resize a handle, use VO and two arrow keys (for example, press VO-Right Arrow-Up Arrow to extend the top right handle of an object). Move an object VO-Command-` Then use the VO and arrow keys (for example, press VO-Left Arrow to move an object left). To move an object diagonally, use VO and two arrow keys (for example, press VO-Left Arrow-Up Arrow to move an object diagonally left and up). Stop scrolling or resizing Escape Create a custom label VO-/ Close the current window or the selected desktop in Mission Control VO-Command-Escape Open the Actions menu VO-Command-Space bar Navigation commands Use these commands to move around the screen, move inside windows and webpages, and control cursor tracking. NOTE:If your keyboard has an Fn key, press it when you press a function key. ACTION COMMAND Move the VoiceOver cursor up VO-Up Arrow Move the VoiceOver cursor down VO-Down Arrow Move the VoiceOver cursor to the left VO-Left Arrow Move the VoiceOver cursor to the right VO-Right Arrow Move to the top of the visible area (such as a window or text area) where the VoiceOver cursor is located VO-Home On some keyboards, press VO-Fn-Left Arrow. Move to the bottom of the visible area (such as a window or text area) where the VoiceOver cursor is located VO-End On some keyboards, press VO-Fn-Right Arrow. Move to the top of the area (such as a window or text area) where the VoiceOver cursor is located, scrolling if necessary VO-Shift-Home On some keyboards, press VO-Shift-Fn-Left Arrow. Move to the bottom of the area (such as a window or text area) where the VoiceOver cursor is located, scrolling if necessary VO-Shift-End On some keyboards, press VO-Shift-Fn-Right Arrow. Move to the top of a window, the first item in the Dock, or the first item on your desktop, depending on your location VO-Command-Home On some keyboards, press VO-Command-Fn-Left Arrow. Move to the lower-right corner of a window, the last item in the Dock, or the last item on your desktop, depending on your location VO-Command-End On some keyboards, press VO-Command-Fn-Right Arrow. Move the window containing the VoiceOver cursor to the front, making it the active window VO-Shift-F2 Open the Item Chooser VO-I Move to the Dock VO-D Move to the desktop VO-Shift-D Move to the menu bar VO-M Move to the status menus in the menu bar VO-M-M Open a shortcut menu VO-Shift-M Jump to a linked item (for example, from a Mail message in the Inbox to its message text) VO-J Temporarily disable or enable the cursor tracking options you selected in VoiceOver Utility The command doesn’t change the settings in VoiceOver Utility. VO-Shift-F3 Move the VoiceOver cursor to the keyboard focus VO-Shift-F4 Move the keyboard focus to the VoiceOver cursor VO-Command-F4 Move the VoiceOver cursor to the mouse pointer VO-Shift-F5 Move the mouse pointer to the VoiceOver cursor VO-Command-F5 Jump from the current location to any displayed input method or auto correction panel, and then jump back to the original location VO-Shift-J Find text VO-F While finding text, cycle through search item history VO-Up Arrow or Down Arrow Move the VoiceOver cursor in the given direction, wrapping when necessary VO-Command-Shift-arrow keys Set or remove a hot spot VO-Shift-[number key] Jump to a hot spot VO-[number key] Hear a description of a hot spot VO-Command-[number key] Toggles watching a hot spot for changes VO-Command-Shift-[number key] Open the Hot Spot Chooser VO-[number key]-[number key] Move to the next hot spot VO-] Move to the previous hot spot VO-[ Jump back to a parent folder VO-Command-\ Jump to the sort button in a column header in a table VO-| If the table also contains a row header, VoiceOver displays a menu where you choose a column or row header. Press VO-Right Arrow until you hear the header you want, then press the Space bar. Orientation commands Use these commands to hear information about the current item and what’s open on the screen. NOTE:If your keyboard has an Fn key, press it when you press a function key. ACTION COMMAND Hear a summary of open apps VO-F1 Open the Application Chooser VO-F1-F1 Hear a summary of the current window VO-F2 Open the Window Chooser VO-F2-F2 Hear the dimensions of the current window and the section of the screen where it’s located VO-Command-F2 Hear the position of the current window and whether anything overlaps it VO-Command-F2-F2 Hear a description of the item in the VoiceOver cursor, including the item’s current state, such as whether a checkbox is selected, or the percent value of a slider VO-F3 Hear the dimensions of the current item and the section of the screen where it’s located VO-Command-F3 Hear the position of the current item and whether anything overlaps it VO-Command-F3-F3 Hear a description of the item that has keyboard focus, including its current state, such as whether a checkbox is selected, or the percent value of a slider VO-F4 Hear details about the item that has the keyboard focus In text, you hear the location of the insertion point relative to the top-left corner of the text item in which the insertion point is located. For example, you might hear “Insertion point is two inches right, five inches down from top-left corner of edit text.” VO-F4-F4 Hear a description of the item under the mouse pointer, including the item’s current state, such as whether a checkbox is selected, or the percent value of a slider VO-F5 Hear the location of the mouse pointer as x and y coordinates on the screen, relative to the top-left corner of the screen VO-F5-F5 Hear the location of the mouse pointer as x and y coordinates relative to the current window VO-F5-F5-F5 Read the selected item VO-F6 Read the contents of the VoiceOver cursor VO-A Read the visible contents of the window, the Dock, or your desktop, depending on your location VO-Shift-W Repeat the last spoken phrase VO-Z Copy the last spoken phrase to the Clipboard (also called the “Pasteboard”) VO-Shift-C Save the last spoken phrase and the crash log to a file on the desktop for troubleshooting VO-Shift-Z Search commands Use these commands to search for text attributes, graphics, controls, and other items in text documents and webpages. NOTE:If your keyboard has an Fn key, press it when you press a function key. ACTION COMMAND Find VO-F Open the Find Commands menu VO-Shift-F Find the next searched text VO-G Find the previous searched text VO-Shift-G Find the next list VO-Command-X Find the previous list VO-Command-Shift-X Find the next bold text VO-Command-B Find the previous bold text VO-Command-Shift-B Find the next style change VO-Command-C Find the previous style change VO-Command-Shift-C Find the next italic text VO-Command-I Find the previous italic text VO-Command-Shift-I Find the next color change VO-Command-K Find the previous color change VO-Command-Shift-K Find the next font change VO-Command-O Find the previous font change VO-Command-Shift-O Find the next table VO-Command-T Find the previous table VO-Command-Shift-T Find the next underlined text VO-Command-U Find the previous underlined text VO-Command-Shift-U Find the next control VO-Command-J Find the previous control VO-Command-Shift-J Find the next different item VO-Command-D Find the previous different item VO-Command-Shift-D Find the next item that’s the same type as the current item VO-Command-S Find the previous item that’s the same type as the current item VO-Command-Shift-S Find the next graphic VO-Command-G Find the previous graphic VO-Command-Shift-G Find the next heading VO-Command-H Find the previous heading VO-Command-Shift-H Find the next link VO-Command-L Find the previous link VO-Command-Shift-L Find the next heading of the same level VO-Command-M Find the previous heading of the same level VO-Command-Shift-M Find the next plain text VO-Command-P Find the previous plain text VO-Command-Shift-P Find the next visited link VO-Command-V Find the previous visited link VO-Command-Shift-V Find the next misspelled word VO-Command-E Find the previous misspelled word VO-Command-Shift-E Find the next blockquote VO-Command-Q Find the previous blockquote VO-Command-Shift-Q Find the next blockquote of the same level VO-Command-W Find the previous blockquote of the same level VO-Command-Shift-W Text commands Use these commands to read and edit text and tables. Before you can use most of these commands, you must interact with text in a text area. NOTE:If your keyboard has an Fn key, press it when you press a function key. ACTION COMMAND Read the contents of the VoiceOver cursor VO-A Select all text in the VoiceOver cursor VO-Shift-A Start and stop text selection in a text field (text selection tracking must be on) VO-Return Speak text attributes VO-T Add a hot spot in text VO-Shift-[number key] For example, VO-Shift-1 or VO-Shift-9. Jump to a hot spot in text VO-[number key] For example, VO-1 or VO-9. Read the paragraph in the VoiceOver cursor VO-P Read the next paragraph VO-Shift-Page Down Read the previous paragraph VO-Shift-Page Up Read the sentence in the VoiceOver cursor VO-S Read the next sentence VO-Command-Page Down Read the previous sentence VO-Command-Page Up Read the line in the VoiceOver cursor VO-L Read the next line VO-Down Arrow Read the previous line VO-Up Arrow Read the word in the VoiceOver cursor VO-W Spell alphabetically the word in the VoiceOver cursor VO-W-W Spell phonetically the word in the VoiceOver cursor VO-W-W-W Read the next word VO-Right Arrow Read the previous word VO-Left Arrow Read the character in the VoiceOver cursor VO-C Read phonetically the character in the VoiceOver cursor VO-C-C Read the next character VO-Shift-Right Arrow Read the previous character VO-Shift-Left Arrow Move to the first visible word VO-Home On a portable Mac, press VO-Fn-Left Arrow. Move to the last visible word VO-End On a portable Mac, press VO-Fn-Right Arrow. Move to the beginning of text, scrolling if necessary VO-Shift-Home On a portable Mac, press VO-Shift-Fn-Left Arrow. Move to the end of text, scrolling if necessary VO-Shift-End On a portable Mac, press VO-Shift-Fn-Right Arrow. Add a new tab stop in TextEdit (the VoiceOver cursor must be on a tab stop in the ruler) VO-Space bar Delete the current tab stop in TextEdit (the VoiceOver cursor must be on a tab stop in the ruler) VO-Delete Interact with a tab stop in TextEdit (the VoiceOver cursor must be on a tab stop in the ruler) VO-Shift-Down Arrow Then use the Left Arrow and Right Arrow keys to move the stop. Reads the current word and character in the VoiceOver cursor VO-F3 Reads the total number of lines and the number of visible lines in a document VO-F3-F3 Web commands Use these commands to navigate and interact with webpages. NOTE:If your keyboard has an Fn key, press it when you press a function key. ACTION COMMAND Move to the next column VO-Command-Y Move to the previous column VO-Command-Shift-Y Move to the next frame VO-Command-F Move to the previous frame VO-Command-Shift-F Move to the next auto web spot VO-Command-N Move to the previous auto web spot VO-Command-Shift-N Move to the next web spot VO-Command-] Move to the previous web spot VO-Command-[ Open the Web rotor VO-U Read from the current location on a webpage to the end of the page VO-A Read from the beginning of a webpage to the current location VO-B Read a link address (URL) VO-Shift-U Read the next sentence VO-Command-Page Down Read the previous sentence VO-Command-Page Up Read webpage statistics VO-Shift-I Remove a web spot VO-Command-Shift-{ Create a web spot VO-Command-Shift-} Set the sweet spot VO-Command-Shift-}-} Turn the grouping of items within a table on or off VO-= VoiceOver standard gestures If you’re using a Multi-Touch trackpad, you can use VoiceOver standard gestures to navigate and interact with items on the screen. You can’t modify the standard gestures. NOTE:If a gesture doesn’t mention a specific number of fingers, use a single finger. ACTION GESTURE General Enable the Trackpad Commander and VoiceOver gestures VO-two-finger rotate clockwise Disable the Trackpad Commander and VoiceOver gestures VO-two-finger rotate counterclockwise Turn the screen curtain on or off Three-finger triple-tap Mute or unmute VoiceOver Three-finger double-tap Navigation Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad Hold down the Shift key and drag a finger horizontally or vertically Move the VoiceOver cursor to the next item Flick right Move the VoiceOver cursor to the previous item Flick left Move content or the scroll bar (depending on the Trackpad Commander setting) Three-finger flick in any direction Go to the Dock Two-finger double-tap near the bottom of the trackpad Go to the menu bar Two-finger double-tap near the top of the trackpad Open the Application Chooser Two-finger double-tap on the left side of the trackpad Open the Window Chooser Two-finger double-tap on the right side of the trackpad Jump to another area of the current app Press Control while touching a finger on the trackpad Interaction Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area Touch (includes tap or dragging) Select an item Double-tap anywhere You can also split-tap (touch one finger and then tap with a second finger) Start interacting with the item in the VoiceOver cursor Two-finger flick right Stop interacting with the item in the VoiceOver cursor Two-finger flick left Scroll one page down or up Three-finger flick up or down Escape (close a menu without making a selection) Two-finger scrub back and forth Increase or decrease the value of a slider, splitter, stepper, or other control Flick up (increase) or flick down (decrease) Text Read the current page, starting at the top Two-finger flick up Read from the VoiceOver cursor to the end of the current page Two-finger flick down Read the current scroll page Three-finger tap Pause or resume speaking Two-finger tap Describe what’s in the VoiceOver cursor Triple-tap Change how VoiceOver reads text (by word, line, sentence, or paragraph) Press Command while touching a finger on the trackpad Rotor Change the rotor settings Two-finger rotate Move to the previous item based on the rotor setting Flick up Move to the next item based on the rotor setting Flick down To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander. Assign VoiceOver commands to gestures New and changed VoiceOver commands in OS X Mavericks VoiceOver in OS X Mavericks (v10.9) introduces several new and changed commands. NOTE:If your keyboard has an Fn key, press it when you press a function key. ACTION COMMAND New Start multiple selection in a list or table, and select each item VO-Command-Return Read the contents of a table row from the location of the VoiceOver cursor to the end of the row VO-R-R Changed Open the Actions menu VO-Command-Space bar Jump to the sort button in a column header in a table. If the table also contains a row header, VoiceOver displays a menu to choose the column or row header. Press VO-Right Arrow until you hear the header you want, then press the Space bar. VO-| Appendix B. VoiceOver Utility Options This chapter lists the options on each VoiceOver Utility pane and explains how to use the options. General category Specify a login greeting, use portable preferences, and enable AppleScript scripts to control VoiceOver. OPTION DESCRIPTION Login Greeting The text VoiceOver speaks when you log in while VoiceOver is on. To change the greeting, type new text over the default text. Display welcome dialog when VoiceOver starts Display the welcome dialog each time VoiceOver is turned on. Portable Preferences VoiceOver indicates whether it detects a portable preferences drive. You can stop or start using a detected drive, or set up a drive. Allow VoiceOver to be controlled with AppleScript Use AppleScript scripts to automate VoiceOver tasks. Speech pane of the Verbosity category Specify the default verbosity level and a verbosity level for specific items—such as apps, checkboxes, or Dock items—and items such as headings, images, or links. OPTION DESCRIPTION Default Speech Verbosity From the pop-up menu, choose the default verbosity level for items on the screen. Details Display a list of controls to individually set the verbosity level. From a control’s Verbosity pop-up menu, choose a verbosity level: Default, Low, Medium, or High. To customize or reorder the information VoiceOver provides (for example, to hear Status first), choose Custom from the control’s Verbosity pop-up menu, then follow the instructions that appear. To use the Verbosity rotor to change the default verbosity level while working, press VO-V. Braille pane of the Verbosity category Specify verbosity levels when using a refreshable braille display. OPTION DESCRIPTION Default Braille Verbosity From the pop-up menu, choose the default verbosity level for items on the screen. Details Show or hide a list of controls to individually set the verbosity level. From a control’s Verbosity pop-up menu, choose a verbosity level: Default, Low, Medium, or High. To customize or reorder the information VoiceOver provides (for example, to hear Status first), choose Custom from the control’s Verbosity pop-up menu, then follow the instructions that appear. To use the Verbosity rotor to change the default verbosity level while working, press VO-V. Text pane of the Verbosity category Customize the amount of punctuation, text, and text attributes you hear, among other options. OPTION DESCRIPTION Punctuation From the pop-up menu, choose how much punctuation you want to hear: All: Hear all special symbols and punctuation except for spaces. VoiceOver reads a sentence like this, “She turned and stopped comma then started walking again period” Most: Hear all special symbols but not common punctuation, such as the comma and period. Some: Hear keyboard symbols and many math symbols, such as + (plus) sign. None: Hear text as you would normally read it, with pauses for commas and periods. Repeated Punctuation From the pop-up menu, choose how you want to hear repeated punctuation: always or a specific number of times. While typing speak From the pop-up menu, choose what you want to hear while typing (called the “typing echo”): Characters, Words, Characters and Words, or Nothing. When moving the cursor From the pop-up menu, choose how you want to hear text when moving the VoiceOver cursor: “Speak text the cursor passes” or “Speak text to the right of the cursor.” When text attributes change From the pop-up menu, choose how you want to hear changes in text attributes: Do Nothing, Play Tone, or Speak Attributes. When encountering a misspelled word Choose how you want to hear misspelled words: Do Nothing: Hear the word. Play Tone: Hear a sound effect. Speak Attributes: Hear “misspelled” and then the word. Change Pitch: Lower the pitch. When encountering a link/attachment From the pop-up menu, choose how you want to hear links and attachments: Speak: Hear “link” and then the link text, or “embedded” and then the attachment name. Change Pitch: Hear the link text or attachment name in a different voice pitch. Play Tone: Hear a sound effect. Do Nothing: Hear the link text or attachment name. Read numbers as From the pop-up menu, choose how you want to hear numbers: Words or Digits. When reading a capital letter From the pop-up menu, choose how you want to hear uppercase letters or words that start with uppercase letters, depending on your settings for typing echo: Change Pitch: Hear the letter or word in a different voice pitch than lowercase text. Play Tone: Hear a sound effect. Speak Cap: Hear “cap” and then the letter or word. Do Nothing: Hear the letter or word. When deleting text From the pop-up menu, choose how you want to hear text that you’re deleting: Change Pitch: Hear the text you’re deleting in a different voice pitch than other text. Play Tone: Hear a sound effect. Speak: Hear “deleting” and then the text you’re deleting. Do Nothing: Hear the text you’re deleting. Words are separated by From the pop-up menu, choose how you want to hear word separations: “Punctuation and whitespace” or Whitespace. Announcements pane of the Verbosity category Specify when you want VoiceOver to announce certain events, such as when a modifier key is pressed, and when to speak certain text, such as labels in dialogs. OPTION DESCRIPTION Announce when mouse cursor enters a window Hear when the mouse pointer goes to a window. This setting is useful if you’re using the mouse pointer independently of the VoiceOver cursor and keyboard focus. Announce when a modifier key is pressed Hear when you press a modifier key. This setting is useful while you’re still learning VoiceOver commands and want to confirm the keys you’re pressing. Announce when the Caps Lock key is pressed Hear when you press the key that makes all letters uppercase. This setting is useful if you press the key inadvertently and are typing everything in uppercase. Speak header when navigating across a table row Hear header text in a table row. This setting is useful for identifying the type of content in a row. Automatically speak text in dialog boxes Hear labels and other text in dialogs. Append phonetic pronunciation to single characters Always hear characters read phonetically. For example, if VoiceOver is reading text by character, it reads “a alpha n november t tango.” When status text changes under VoiceOver cursor From the pop-up menu, choose how you want to hear changes in status text (such as the percentage complete of a software installation): Play Tone, Speak Text, or Do Nothing. When progress indicator changes under VoiceOver cursor From the pop-up menu, choose how you want to hear progress indicator changes: Play Tone, Speak Update, or Do Nothing. Speak size and position in From the pop-up menu, choose how you want to hear size and position: Inches, Millimeters, or Pixels. Speak text under mouse after delay Drag the slider toward Short or Long to specify how many seconds you want VoiceOver to wait before it speaks the text that’s under the mouse pointer. Hints pane of the Verbosity category Get more information about the item in the VoiceOver cursor. OPTION DESCRIPTION Speak instructions for using the item in the VoiceOver cursor Have VoiceOver automatically read instructions, if available, for the item. When an item has a help tag From the pop-up menu, choose how you want to hear the descriptions (called “help tags” or “tooltips”) that are displayed when the pointer rests briefly over an item. Speak hints after delay Drag the slider toward Short or Long to set how many seconds VoiceOver waits before it speaks the hint for the item under the mouse pointer. Voices pane of the Speech category Mute speech and customize voice settings. OPTION DESCRIPTION Mute Speech Turn off VoiceOver speech. This option doesn’t affect VoiceOver sound effects or the audio of other apps. Voice From the pop-up menu, choose a default voice for VoiceOver, such as Alex. To add compact or premium voices to the pop-up menu, choose Customize, then select the voices. A yellow triangle indicates a voice must be downloaded before it can appear in the menu. Rate Set the speed at which a voice speaks. Pitch Set how high or low a voice speaks. Volume Set how loudly or softly a voice speaks. Intonation Click the up or down arrow on the stepper to set how a voice rises and falls as it speaks. Disclosure triangle Set voices for specific items, such as status or attributes. Pronunciation pane of the Speech category Customize how VoiceOver pronounces text and symbols. OPTION DESCRIPTION Text Lists the words, acronyms, or symbols for which you have specified a pronunciation. To change an item listed in the Text column, navigate to it and press VO-Space bar. Substitution Lists the pronunciations you specified. To change an item listed in the Substitution column, navigate to it and press VO-Space bar. Application Lists apps where you want VoiceOver to use the custom pronunciation. To change the app, choose a different app (or All Apps) from the pop-up menu. The pop-up menu lists only apps that are currently open. Ignore Case Ignore capitalization. If VoiceOver is set to indicate capitalization when speaking, you might want to ignore uppercase and lowercase in your pronunciations. Add (+) Add a substitution to the list. Remove (-) Remove the selected substitution from the list. Navigation category Customize navigation settings, such as those related to using the VoiceOver cursor, automatically interacting with items, and fast searching. OPTION DESCRIPTION Initial position of VoiceOver cursor From the pop-up menu, choose the initial position of the VoiceOver cursor in a new window: “Keyboard focused item” or “First item in window.” Keyboard focus follows VoiceOver cursor Make the keyboard focus follow wherever the VoiceOver cursor goes whenever possible. VoiceOver cursor follows keyboard focus Make the VoiceOver cursor follow wherever the keyboard focus goes. When this option and the previous option are selected, VoiceOver cursor tracking is on. Insertion point follows VoiceOver cursor Make the insertion point follow wherever the VoiceOver cursor goes. VoiceOver cursor follows insertion point Make the VoiceOver cursor follow wherever the insertion point goes. Mouse pointer From the pop-up menu, choose how you want the mouse pointer to follow the VoiceOver cursor: Ignores VoiceOver cursor, Follows VoiceOver cursor, or Moves VoiceOver cursor. The default setting is Ignores VoiceOver cursor. Allow cursor wrapping Wrap the VoiceOver cursor up, down, left, and right in a continuous loop when you’re navigating. Skip redundant labels Hear duplicate labels only once. Automatically interact when using tab key Be able to use VoiceOver to interact with items you tab to without first having to use VO-Shift-Down Arrow. Enable fast searching Be able to quickly search for the next or previous element on the screen that begins with a specified letter. From the pop-up menu, choose the Left Command key or the Right Command key for fast searching. For example, to search for the next element that begins with the letter S, you could press Left Command-S. To search for the previous element, you could press Left Command-Shift-S. Navigation pane of the Web category Set options related to navigating and browsing webpages. OPTION DESCRIPTION Navigate webpages by Select a method for navigating webpages: DOM order: Move the VoiceOver cursor through a webpage based on the page’s Document Object Model (DOM). Navigating by DOM moves left and right, in the order the webpage’s author intended. (Moving up and down in DOM mode is based on the current setting of the Web Item rotor.) Grouping items: Move the VoiceOver cursor from one group of information to the next, such as from one paragraph to the next paragraph. Navigating by group moves in any direction, to help give you a sense of context. Group items within Hear a summary of a table and a summary of each cell as you navigate the table using the arrow keys. This option is useful if you’re familiar with a table and don’t need to read its contents. If you do want to read the contents of a cell, you must interact with it using VoiceOver commands. When the checkbox isn’t selected, you automatically interact with a table and read its contents, cell by cell, as you navigate the table using the arrow keys. Speak column and row numbers Have VoiceOver speak the column and row numbers in tables to help you navigate complex tables more easily. This option is on by default. Navigate images From the pop-up menu, choose how you want VoiceOver to navigate images: Never, With Descriptions, or Always. By default, VoiceOver navigates only to images that contain a description, called “alt text.” This option is useful because many websites use images for links. Enable Live Regions Have VoiceOver speak all live regions it encounters on webpages. If you prefer to hear only specific live regions, deselect the checkbox, then use the Web rotor to find and enable specific live regions on a webpage. Page Loading pane of the Web category Specify what happens when a webpage opens. OPTION DESCRIPTION Speak webpage summary Have VoiceOver speak a summary (statistics) of the items on a webpage when the page opens. The summary is based on the items included in the Web rotor. For example, if the rotor includes headers, links, auto web spots, and form controls, the webpage summary that VoiceOver speaks might sound like “The Apple - Accessibility page has 14 headers 52 links 8 auto web spots 1 form control.” Move the VoiceOver cursor to it Position the VoiceOver cursor on the first item or the sweet spot (if one exists) in the webpage when the webpage opens. Automatically speak the webpage Have VoiceOver start speaking a webpage when the page opens. If you set a sweet spot on the page, VoiceOver starts reading from the sweet spot; otherwise, it starts reading from the beginning of the page. This option is available only if you selected the previous option to move the VoiceOver cursor to the first item or sweet spot. While a webpage loads From the pop-up menu, choose what you want to hear while a webpage is being displayed: Speak Progress, Play Tone, or Do Nothing. By default, VoiceOver speaks the percentage of the webpage that is loaded. Web Rotor pane of the Web category Specify which items to include, and in what order, in the Web rotor. OPTION DESCRIPTION Item Order The list of items you can include in the Web rotor. Select a checkbox to include an item in the rotor; deselect a checkbox to exclude an item from the rotor. You can reorder items in the list so the items you use most appear first in the rotor. Sound category Set options related to sound effects and positional audio. OPTION DESCRIPTION Mute sound effects Turn off VoiceOver sound effects. This option doesn’t affect VoiceOver speech or the audio of other apps. Enable audio ducking By default, the volume of audio content, such as a podcast or music, is appropriately reduced whenever VoiceOver speaks. To turn this feature off, deselect the checkbox. Enable positional audio Add audio cues that help you locate items on the screen. The cues play in stereo; you need a pair of earbuds or stereo headphones, or standard stereo speakers, to hear the cues. Positional audio is on by default. Output Device From the pop-up menu, choose the device you want to use to output sounds. This option is most useful if you have an audio output device, such as headphones or speakers, connected to your Mac. VoiceOver Cursor pane of the Visuals category Set options related to the VoiceOver cursor. OPTION DESCRIPTION Show VoiceOver cursor Show the VoiceOver cursor (the default setting). The VoiceOver cursor appears as a dark outlined box. VoiceOver Cursor Magnification Drag the slider toward Small or Large to decrease or increase the size of the VoiceOver cursor. When reading text, move VoiceOver cursor by From the pop-up menu, choose how the VoiceOver cursor should move while reading: Sentence or Word. Caption Panel pane of the Visuals category Customize the size and appearance of the caption panel. OPTION DESCRIPTION Show caption panel Display the caption panel. Caption Panel Font Size Drag the slider toward Small or Large to set the font size in the caption panel. Rows in Caption Panel Drag the slider toward 1 or 10 to remove or add rows, changing the height of the panel. Caption Panel Transparency Drag the slider toward 0 percent or 100 percent to decrease or increase the panel’s transparency. If you increase the transparency, the panel’s background color becomes lighter and you can more easily see the screen behind the panel. Braille Panel pane of the Visuals category Customize the appearance of the braille panel. OPTION DESCRIPTION Show Braille Panel From the pop-up menu, choose how you want to display the braille panel: Off, On, or Automatic. When set to the default setting, Automatic, the braille panel is shown when you connect a refreshable braille display to your Mac. Braille Font Color From the pop-up menu, choose a color for displaying text in the braille panel. Braille Panel Font Size Drag the slider toward Small or Large to set the font size in the braille panel. Braille Panel Transparency Drag the slider toward 0 percent or 100 percent to decrease or increase the panel’s transparency. If you increase the transparency, the panel’s background color becomes lighter and you can more easily see the screen behind the panel. Touch pane of the Visuals category Customize the transparency of the background that dims the screen around the focus area. This pane is available only when you’re using a Multi-Touch trackpad. OPTION DESCRIPTION Background Transparency Drag the slider toward 0 percent or 100 percent to decrease or increase the transparency of the dimmed background around the focus area. If you increase the transparency, the background color becomes lighter and you can more easily see the rest of the screen. Menus pane of the Visuals category Customize the appearance of VoiceOver menus, such as the Commands menu or Web menu. OPTION DESCRIPTION VoiceOver Menus Font Size Drag the slider toward Small or Large to set the font size used in VoiceOver menus. VoiceOver Menus Transparency Drag the slider toward 0 percent or 100 percent to decrease or increase the transparency of the menus. If you increase the transparency, a menu’s background color becomes lighter and you can more easily see the screen behind the menu. Trackpad pane of the Commanders category Enable the Trackpad Commander and set other options for using VoiceOver gestures. This pane is available only when VoiceOver detects a Multi-Touch trackpad. OPTION DESCRIPTION Enable Trackpad Commander Use standard VoiceOver gestures and assign VoiceOver commands to other gestures. Automatically select items in lists and tables Have VoiceOver automatically select the list or table item you’re touching when you lift your finger from the trackpad. If you don’t want VoiceOver to select an item, drag your finger off the list or table before lifting your finger. Pause speech when not touching the trackpad Have VoiceOver pause speech when you lift your finger off the trackpad while dragging. For example, if you’re dragging a finger to navigate lines of text and you lift your finger, VoiceOver pauses speech. Scroll gesture moves content instead of scroll bar Scroll the content (not the scroll bar) down or up. Normally when you move the scroll bar down or up, the content moves in the opposite direction. When this option is selected, the content moves in the same direction you’re scrolling. Assign Commands Display the pane in which you assign VoiceOver commands to gestures. When the Trackpad Commander is on, its commands are included in the Commands menu. To display the Commands menu, press VO-H-H. Find commands using the Commands menu Trackpad Commander assignments pane Assign VoiceOver commands to trackpad gestures. OPTION DESCRIPTION Modifier pop-up menu From the pop-up menu, choose the modifier key you want to use with gestures. By default, no modifier is used. Trackpad Gesture Indicates the gestures you can assign VoiceOver commands to. Command Click the command field to display pop-up menus for the different types of commands you can assign to a gesture. NumPad pane of the Commanders category Enable the NumPad Commander and assign VoiceOver commands to numeric keypad keys. OPTION DESCRIPTION Enable NumPad Commander Enable the NumPad Commander. When the NumPad Commander is enabled, you can’t use Mouse Keys, an accessibility feature in OS X. Modifier pop-up menu From the pop-up menu, choose a modifier key to increase the number of numeric keys you can assign VoiceOver commands to. Numpad Key Indicates the numeric keypad key you assigned a VoiceOver command to. Command Indicates the VoiceOver command currently assigned to a numeric keypad key. Click the current command to display pop-up menus for the different types of commands you can assign to a key. Keyboard pane of the Commanders category Enable the Keyboard Commander and assign VoiceOver commands to key combinations that might be easier for you to remember or perform. OPTION DESCRIPTION Enable Keyboard Commander Enable the Keyboard Commander so you can assign VoiceOver commands to keyboard keys. Use From the pop-up menu, select the key you want to use as the designated Keyboard Commander modifier: Right Option Key, Left Option Key, or Both Option Keys. Keyboard Key The key to assign to the VoiceOver command that’s displayed. Command From the pop-up menus, choose a different command to assign to a key. Add (+) Add a key to the list. Type the key, then choose a VoiceOver command to assign to it from the Command pop-up menu. Remove (-) Delete a key from the list. Quick Nav pane of the Commanders category Enable and set options for using Quick Nav, and assign VoiceOver commands to single keys (instead of key combinations) for navigating webpages using Quick Nav. OPTION DESCRIPTION Enable Quick Nav Turn Quick Nav on or off. Allow toggling of Quick Nav using left and right arrow keys Turn Quick Nav on or off while working by pressing the Left Arrow and Right Arrow keys at the same time. Enable single-key webpage navigation when using Quick Nav Enable the use of Quick Nav single-key commands while viewing webpages. To customize the single-key commands, click Assign Commands. Assign Commands Display the pane for assigning VoiceOver commands to arrow and letter keys on the keyboard. Quick Nav Commander assignments pane Assign VoiceOver commands to single keys for use when navigating webpages using Quick Nav. OPTION DESCRIPTION Command type From the pop-up menu, choose Arrows or Single Keys. Single Key Indicates the single key to which a VoiceOver command is assigned. Command Indicates the VoiceOver command currently assigned to a single key. Click the current command to display pop-up menus for the different types of commands you can assign to a key. Add (+) Add a key to the list. Type the key, then choose a VoiceOver command to assign to it from the pop-up menus. Remove (-) Delete a key from the list. Layout pane of the Braille category Customize settings for a braille display connected to or paired with your Mac. OPTION DESCRIPTION Braille Display VoiceOver indicates the braille display it detects. Braille Translation From the pop-up menu, choose a translation language to use for showing output. Show contracted braille Show output in contracted braille. By default, VoiceOver shows output in uncontracted braille. If you select this option, “Show eight-dot braille” is automatically deselected. When using contracted braille, VoiceOver automatically uncontracts the word in the VoiceOver cursor so you can edit it more precisely, then contracts the word when the VoiceOver cursor leaves it. Show eight-dot braille Use eight-dot braille (uncontracted) if the primary braille display supports it. This option is selected by default. Use automatic braille translation By default, VoiceOver automatically determines when you’re done typing on your braille display, then translates your typing into braille output. If you use six-dot braille, and the automatic translation seems to cause errors, you can deselect this checkbox, then manually indicate when you’re done typing. To do so, press one of the following on your braille display: the Space bar, dots 4 and 5 and the Space bar, or any non-Perkins braille key. Use dots 7 and 8 to indicate cursor Raise dots 7 and 8 to indicate the position of the VoiceOver cursor. This option is selected by default. Status cells Select checkboxes for the status cells you want to use. Show general display status: Show information about announcements, and about the direction in which to pan the current line. For example, dots 1 and 2 indicate unread and read announcements respectively, and dots 7 and 8 indicate you can pan the display left or right respectively. Show text style: Show common text styles, such as bold or italic font. For example, dots 1 and 2 indicate bold and italic text respectively, and dot 4 indicates the selected text is misspelled. Show extended text style: Show less common text styles, such as strikethrough or superscript. For example, dots 1 and 2 indicate text is superscript and subscript respectively, and dot 5 indicates the selected text has a double underline. Show status on the Select a radio button to use cells to the left (the default) or right of the braille line as the status cells. Change this setting only if your braille display doesn’t provide dedicated status cells. Display alert messages Drag the slider all the way to the left, to Off, to not display alert messages. To set the speed with which alerts are displayed, drag the slider between Fast (toward the left) or Slow (all the way to the right). Displays pane of the Braille category View a list of the refreshable braille displays connected to or paired with your Mac, and assign VoiceOver commands to keys on the braille displays. OPTION DESCRIPTION Display list VoiceOver lists the braille displays it has detected. The list indicates the primary device and disconnected devices, as well as devices physically connected to your Mac (USB symbol) and Bluetooth devices paired with your Mac (Bluetooth symbol). Display information VoiceOver shows information about the display selected in the list, such as the number of cells and status cells. Primary braille display Use the selected braille display as the primary display for mirroring. Assign Commands Assign VoiceOver commands to keys on your braille display. Add (+) Set up a Bluetooth braille display to use with VoiceOver. You can use one Bluetooth braille display at a time. Remove (-) Delete a Bluetooth braille display from the list. Allow input from From the pop-up menu, choose the displays from which the selected display should accept input: Primary braille display, All braille displays, or No braille displays. To accept input only from the primary display, and prevent input from each braille display that’s connected to your Mac, choose “Primary braille displays.” For example, if you’re in a classroom setting where students’ braille displays are connected to a Mac, you can prevent accidental input from those displays, accepting input only from the instructor’s display. For some Bluetooth braille displays, after you turn off the braille display and move it out of range of your Mac, wait for at least 30 seconds to make sure your Mac indicates the braille display is no longer connected. Your Mac tries to maintain the connection during this interval in case the braille display was accidentally turned off or moved out of range. When you turn on a paired Bluetooth braille display and move it in range of your Mac, your Mac should detect it in about five seconds. Activities category Set up activities and customize VoiceOver settings for specific uses. OPTION DESCRIPTION Activities list Select an activity to display or change its settings. When creating an activity, type its name in the list. Settings Select a setting’s checkbox to include the setting in the activity. Three settings are listed: Verbosity, Voices, and Hot Spots. To show additional settings, click the disclosure triangle located to the far right of Hot Spots. To hide them, click it again. Set Customize a setting’s options. Select Apps Browse for and choose an app to associate with the activity. The activity is automatically used whenever you open the app. An app can be associated with only one activity at a time. Add or Remove Set up a new activity, or delete an activity from the list. Duplicate Activity Choose this command from the Action pop-up menu (looks like a gear) to create a duplicate of the currently selected activity. This command is a fast way to create an activity that differs only slightly from an existing activity (for example, only the voice differs). If you duplicate an activity that has an app associated with it, the association is not duplicated; an app can be associated with only one activity at a time. Reset Activity to My Current VoiceOver Settings Choose this command from the Action pop-up menu (looks like a gear) to change the selected activity to have the same settings as you specified throughout VoiceOver Utility. This command is useful if you don’t like how you customized an activity and want to start over with settings that match all of your current VoiceOver settings. Reset Activity to VoiceOver Default Settings Choose this command from the Action pop-up menu (looks like a gear) to change the selected activity to have the default VoiceOver settings.